သင္ဟာ ေတာအုပ္တစ္ခုထဲကုိ လမ္းေလွ်ာက္သြားေနတယ္။တစ္ေယာက္တည္း သြားတာမဟုတ္ဘူး။ သင့္မွာ အေဖာ္ပါတယ္။ ဘယ္သူနဲ႔ သြားေနတာလဲ။ ဘယ္သူနဲ႔သြားခ်င္ေနတာလဲ။
သင္ဟာ ေတာအုပ္ထဲကုိသြားေနတုန္း တိရစၦာန္တစ္ေကာင္နဲ႔ေတြ႕တယ္ဆုိပါစုိ႔။ သင္ေတြ႕တဲ့တိရစၦာန္က ဘယ္လုိအေကာင္မ်ိဳးျဖစ္မလဲ။
အဲဒီတိရစၦာန္နဲ႔ေတြ႕တဲ့အခါသင့္ကို ဘယ္လုိမ်ိဳး လုပ္မလဲလုိ႔ထင္လဲ။
ေတာအုပ္ထဲကုိ သင္ဆက္သြားတယ္။ သြားရင္းသြားရင္း သင္အိပ္မက္ထဲက ေတာင့္တေမွ်ာ္လင့္ခဲ့ဖူးတဲ့ သင္ေနခ်င္တဲ့ အိမ္ပံုစံမ်ိဳးေတြ႕ရတယ္။ အဲဒီ့အိမ္ဟာ ဘယ္ေလာက္ထိႀကီးလဲ။
သင့္အိမ္မက္ထဲက ေတြ႕ရတဲ့အိမ္ဟာ ၿခံစည္း႐ုိးခတ္ထားလား။အိမ္ထဲ ၀င္လုိက္ေတာ့ ထမင္းစားခန္းေတြ႕ရတယ္။ ထမင္းစားခန္းထဲမွာ စားပဲြတစ္လံုးေတြ႕ရတယ္။စားပဲြေပၚမွာ ဘာေတြရွိလဲ။
အိမ္ထဲ ဆက္၀င္သြားရင္းေနာက္ေဖးေပါက္ကေန သင္ျပန္ထြက္လာခဲ့တယ္။ ျမက္ခင္းေပၚမွာခြက္တစ္လံုး ခ်ထားတာ ေတြ႕ရတယ္ ဆုိပါစုိ႔၊ အဲဒီခြက္ဟာ ဘာနဲ႔လုပ္ထားလဲ။
အဲဒီခြက္ကို သင္ဘာလုပ္မလဲလုိ႔ စိတ္ကူးလဲ။
သင္ဟာ ေခ်ာင္းေလးတစ္ခုကုိထပ္ေတြ႕တယ္ဆုိပါစုိ႔။ ဘယ္လုိေခ်ာင္းေလးလဲ၊ ဘယ္ေလာက္ႀကီးလဲ၊ ေရစီးဘယ္ေလာက္သန္လဲ။
အဲဒီ့ေခ်ာင္းေလးကို သင္ဘယ္လုိကူးမလဲ။
အေျဖမ်ား
သင္နဲ႔တဲြေလွ်ာက္တဲ့သူ၊ တဲြေလွ်ာက္ခ်င္တဲ့သူဟာ သင့္ဘ၀မွာအေရးအႀကီးဆံုးသူတစ္ေယာက္ပဲျဖစ္ပါတယ္။
တိရစၦာန္ရဲ႕ အႀကီး၊ အေသးပမာဏဟာ သင္ႀကံဳေတြ႕ေနရတဲ့ျပႆနာရဲ႕ အတိမ္၊ အနက္ကုိညႊန္းဆုိပါတယ္။
တိရစၦာန္နဲ႔ ဘယ္လိုဆက္ဆံသလဲ၊ ဘယ္လုိျပဳမူသလဲဆုိတာကျပႆနာအေပၚ ဘယ္လုိတံု႔ျပန္သလဲဆုိတာကို ညႊန္းပါတယ္။
သင့္ရဲ႕အိမ္မက္ထဲကအိမ္ရဲ႕အႀကီး၊ အေသးပမာဏဟာ သင့္ရည္မွန္းခ်က္ရဲ႕ အႀကီး၊ အေသးကိုညႊန္းပါတယ္။
ၿခံစည္း႐ုိးမခတ္ထားတာဟာ သင္ဟာ လူေတြနဲ႔ေပါင္းသင္းဆက္ဆံတဲ့အခါ ပြင့္လင္းတတ္သူတစ္ဦး၊လူတုိင္းနဲ႔ ေဖာ္ေရႊခင္မင္တတ္သူတစ္ဦးျဖစ္ေၾကာင္းညႊန္းဆုိၿပီး
ၿခံစည္း႐ုိးခတ္ထားတယ္ဆုိရင္ေတာ့သင္ဟာ အလြယ္တကူနဲ႔ ခင္မင္မိတ္ေဆြျဖစ္လြယ္တဲ့သူမဟုတ္ေၾကာင္းညႊန္းဆုိပါတယ္။
တကယ္လုိ႔ သင့္အေျဖမွာ အစားအေသာက္၊ လူေတြ၊ ပန္းေတြမပါခဲ့ဘူးဆုိရင္ သင္ဟာ အခုအခ်ိန္မွာ ေပ်ာ္ရႊင္မႈနည္းပါးေနတယ္လုိ႔ဆုိရပါလိမ့္မယ္။
သင္ေျပာလုိက္တဲ့ ဖန္ခြက္ရဲ႕သတၱဳခံႏုိင္ရည္စြမ္းအားဟာ သင္နံပါတ္တစ္ကေျဖခဲ့တဲ့ လူနဲ႔ပတ္သက္ၿပီး ဆက္ဆံေရးမွာ ခံႏုိင္ရည္ဘယ္ေလာက္ရွိတယ္ဆုိတာကို ေဖာ္ျပေနပါတယ္။ ဥပမာ-ပလတ္စတစ္၊စာရြက္၊ ဖန္ခြက္၊ စာရြက္၊ ဖန္ခြက္အဲဒါ့ေတြဟာ ခံႏုိင္ရည္ရွိတဲ့ဟာေတြမဟုတ္ပါဘူး။ ပလတ္စတစ္နဲ႔ သံသတၳဳတုိ႔ကေတာ့ ခံႏုိင္ရည္ရွိတဲ့ဟာေတြ ျဖစ္ပါတယ္။
ဖန္ခြက္ကို ဘာလုပ္မလဲဆုိတာက နံပါတ္တစ္က သင့္ဘ၀ရဲ႕အေရးအႀကီးဆံုးပုဂိၢဳလ္နဲ႔ပတ္သက္ၿပီး ဘယ္လုိသေဘာထားရိွတယ္ဆုိတာကို ညႊန္းေနပါတယ္။
သင့္ရဲ႕ လိင္စိတ္ပမာဏကုိညႊန္းဆုိပါတယ္။
ျဖတ္ကူးတဲ့အခါမွာ ေရဘယ္ေလာက္စုိသလဲဆုိတဲ့အေပၚမူတည္ၿပီး သင့္ဘ၀မွာ လိင္စိတ္ဟာ ဘယ္ေလာက္အထိ အေရးပါတယ္ဆုိတာကို ညႊန္းဆုိပါတယ္။ၿပံဳးေပ်ာ္ရႊင္ႏုိင္ၾကပါေစသား….
ေအာင္ျခင္းရွစ္ပါး
နာဂံ ဗကံ ဇိနိ ဇိေနာ၊ ေဟာတု ေမ ဇယမဂၤလံ။
ေယာဇိေနာ=အၾကင္ငါးမာရ္ပယ္ဘိ ဂုဏ္သတၱိေၾကာင့္ ဇိနအမည္ ေရႊဘြဲ႔ေတာ္ခ်ီအပ္ေသာ ျမတ္စြာဘုရားသည္။
၁။ မာရံ=ယူဇနာတရာ့ငါးဆယ္ အံ႔ဖြယ္ႀကီးဘိ ဂိရိေမခလာ မည္သာတြင္ျခင္း နတ္ဆင္မင္းထက္ စီးနင္းတက္၍ ေၾကာက္မက္ဖြယ္သာ စစ္ဗိုလ္ပါနဲ႔ ၀ဲယာစီယွက္ လက္ရံုးတေထာင္ ဖန္ဆင္းေဆာင္၍ ႏိုင္ေယာင္စစ္ထိုး ေက်ာ္လြ႔ံဟိုးသား တန္ခိုးေတာက္ပ ေတဇထန္ျပင္း မာရ္နတ္မင္းကိုလည္းေကာင္း။
မာရ္နတ္မင္းကို ေအာင္ေတာ္မူပံု
၂။ ယကၡံ=စြယ္ရွည္ေငါေငါ ျမင္သူေမာမွ် နက္ေက်ာနီက်င္ ေမြးမွ်င္မုတ္ဆိတ္ ဖြားလ်ားျမိတ္သား လန္႔ထိတ္ဖြယ္သာ ႀကီးဧရာႏွင့္ သခ်ၤာျမားေျမာင္ ေလးေထာင္သံုးရာ ႏွစ္ဆယ္သာေအာင္ မ်ားစြာလူသား ေန႔တိုင္းစားသည့္ စြမ္းအားႀကီးလွ အာဠာ၀ကတြင္ျခင္း ဘီလူးမင္းကိုလည္းေကာင္း။
အာဠာ၀က ဘီလူးမင္းကိုေအာင္ေတာ္မူပံု
၃။ ဂဇံ=ဆယ့္ေျခာက္ေမာင္းအိုး ျဖိဳးျဖိဳးျပည့္ႏွက္ ေသအရက္ကို တိုက္လ်က္ထန္ျပင္း နင္းစိမ့္ရည္မွတ္ ေဒ၀ဒတ္တို႔ တိုက္လႊတ္ေသာအား ဘုရားျမတ္စြာ ဆြမ္းခံရာ၌ ပက္ပါဦးတည္ စူးစူးရည္၍ သတ္မည္ဧကန္ အျမန္ေျပးလာ သံဆိုးစြာျဖင့္ နာဠာဂီရိ မည္ရွိေခၚတြင္ မင္းစီးဆင္ကိုလည္းေကာင္း။
နာဠာဂီရိ ဆင္ကိုေအာင္ေတာ္မူပံု
၄။ ေစာရံ=သံုးယူဇနာ ရွည္စြာခ်င့္မွန္း ခရီးလမ္းကို မပန္းမဟိုက္ မရႈိက္လ်င္ျပင္း တဟုန္ျခင္းျဖင့္ ေျပးနင္းစြမ္းႏိုင္ ျပိဳင္သူဘက္ရွား လူအမ်ားကို ဓားလွံစြဲကာ ဖမ္းသတ္ကာလွ်င္ ယူခါလက္ညႇိဳး ႀကိဳးျဖင့္သီရံုး ပန္းကံုးအသြင္ လည္၀ယ္ဆင္ေသာေၾကာင့္ အဂၤုလိမာလ မည္ရတြင္ျပီး သူခိုးႀကီကိုလည္းေကာင္း။
အဂၤုလိမာလ ကိုေအာင္ေတာ္မူပံု
၅။ စိဥၥမာနဥၥ=ပရိသတ္အား ျမတ္ဘုရားလွ်င္ တရားေဟာကာ ေနစဥ္ခါ၌ ေသခ်ာေျပျပစ္ ပတ္ရစ္ဖြဲ႔ေႏွာင္ ကိုယ္၀န္ေဆာင္၍ ဘုန္းေခါင္လူ႔ဖ်ား ကၽြန္မအားကို ျပစ္မွားျပီးခါ ဘယ့္ေၾကာင့္သာလွ်င္ အိပ္ရာမျပင္ သူေတာ္စင္သို႔ မျမင္ေသာ့ေထြ ဣေျႏၵႏွင့္ ေနသနည္းဟု အမႈေဖြရွာ စြပ္စြဲလာေသာ စိဥၥမာမည္ထုတ္ မိန္းမယုတ္ကိုလည္းေကာင္း။
စိဥၥမာန မိန္းမယုတ္ကိုေအာင္ေတာ္မူပံု
၆။ သစၥကံ=၀ါဒတေထာင္ အာဂံုေဆာင္၍ ဂုဏ္ေရာင္လႊားပ မိုက္မာနေၾကာင့္ အနိစၥအနတၱ သခၤါရကို နိစၥအတၱာ ထပ္၍သာလွ်င္ ျမတ္စြာရွင္ေစာ တရားေဟာလည္း သေဘာမက် မွားေလစြဟု ရႈတ္ခ်ခါခါ ျပစ္တင္လာေသာ မိစၧာယူႀကိဳက္ ပရိဗိုဇ္သစၥက ကူဋဒႏၲကိုလည္းေကာင္း။
သစၥက ပရိဗိုဇ္ကိုေအာင္ေတာ္မူပံု
၇။ နာဂံ=ေလးလ်ံေရာင္စို ေတာင္ျမင္းမိုရ္ကို ကိုယ္ျဖင့္ခုနစ္ထပ္ ရစ္ပတ္ကာလႊမ္း တတ္ႏိုင္စြမ္းေသာ ၾကမ္းထန္းခက္ထန္ မ်က္ေစာင္းမာန္ႏွင့္ ပဌမံအာလိႏၵ ေနသမွ်တလႊား နတ္နဂါးကို ပိုင္ကာစိုးရ တန္ခိုးျပသည့္ နေႏၵာပနႏၵတြင္ျခင္း နဂါးမင္းကိုလည္းေကာင္း။
နေႏၵာပနႏၵ နဂါးမင္းကိုေအာင္ေတာ္မူပံု
အဇိနိ=တန္ခိုးဉာဏ္ရွိန္ ၀ရဇိန္စက္ျမတ္ အတုလႊတ္ျဖင့္ မခၽြတ္ေအာင္ေတာ္မူေလျပီ။
တံ ေတဇသာ=ထိုသို႔ေအာင္ျခင္း တရားမင္း၏ ထြန္း၀င္းေတေဇာ္ အာႏုေဘာ္ျဖင့္။
ေမ=အကၽြႏ္ုပ္အား။
ဇယ်မဂၤလံ=ေရာဂါေဘးဒဏ္ ရန္မာန္ခပင္း စိုးရိမ္ျခင္းကို ႏွိမ္နင္းေအာင္တတ္ ေကာင္းျမတ္လွစြာ မဂၤလာသည္။
ေဟာတု=စင္စစ္မေသြ ျဖစ္ပါေစသတည္း။
မိန္းမေကာင္းအဂၤ ါ ၆၄ ရပ္
(၁)ေၿခလကၡဏာ ............................................ ၁၃ ရပ္
(၂)ကိုယ္လကၡဏာ ..........................................၁၆ ရပ္
(၃)စိတ္လကၡဏာ ...................................... .......၆ ရပ္
(၄)လက္ဖ၀ါးလကၡဏာ .................................... ၉ ရပ္
(၅)လည္ပင္းလကၡဏာ ..................................... ၁ ရပ္
(၆)အသံလကၡဏာ ........................................... ၃ ရပ္
(၇)မ်က္ႏွာလကၡဏာ ...................................... ..၈ ရပ္
(၈)သြားလကၡဏာ ............................................ ၁ ရပ္
(၉)မ်က္ေစ့လကၡဏာ ........................................ ၄ ရပ္
(၁၀)ဆံပင္လကၡဏာ ........................................ ၃ ရပ္
ေျခလကၡဏာ ေကာင္းျခင္း (၁၃)ပါး
၁။ ဦးေဆာက္ပန္းပံုသ႑ာန္ရွိျခင္း
၂။ အိုင္ၾကီး ခုနစ္အိုင္သို႕ေသာ ပံုသ႑ာန္ရွိျခင္း
၃။ ရတနာပန္းေတာင္း ပံုသ႑ာန္ရွိျခင္း
၄။ ကြ်န္းၾကီးေလးကြ်န္း ပံုသ႑ာန္ရွိျခင္း
၅။ ထမင္းပြဲ ပံုသ႑ာန္ရွိျခင္း
၆။ အရံကြ်န္းငယ္ ပံုသ႑ာန္ရွိျခင္း
၇။ လဗိမၼာန္ဖြဲ႕စည္းမွဳ ပံုသ႑ာန္ရွိျခင္း
၈။ ေနဗိမၼာန္ဖြဲ႕စည္းမွဳ ပံုသ႑ာန္ရွိျခင္း
၉။ ၾကယ္တာရာ ဖြဲ႕စည္းမွဳ ပံုသ႑ာန္ရွိျခင္း
၁၀။ ငါးၾကင္းျမီးအစံု ပံုသ႑ာန္ရွိျခင္း
၁၁။ ႏြားသားအမိ ပံုသ႑ာန္ရွိျခင္း
၁၂။ ျခေသၤ့မင္း ပံုသ႑ာန္ရွိျခင္း
၁၃။ ဥေပါသထ ပံုသ႑ာန္ရွိျခင္း....
လက္ဖ၀ါးလကၡဏာ ေကာင္းျခင္း (၉)ပါး
၁။ ၾကာရတနာသြင္ျပင္ ပံုသ႑ာန္ရွိျခင္း
၂။ ခရုသင္းသြင္ျပင္ ပံုသ႑ာန္ရွိျခင္း
၃။ ပဒုမၼာၾကာမ်ိဳးငါးပါး ပံုသ႑ာန္ရွိျခင္း
၄။ ခြ်န္းေတာင္း ပံုသ႑ာန္ရွိျခင္း
၅။ လွံတံသြင္ျပင္ ပံုသ႑ာန္ရွိျခင္း
၆။ ထီး၏သြင္ျပင္ ပံုသ႑ာန္ ရွိျခင္း
၇။ နားေတာင္းသြင္ျပင္ ပံုသ႑ာန္ရွိျခင္း
၈။ တုရင္တိုင္ကဲ့သို႕ေသာ သြင္ျပင္ ပံုသ႑ာန္ရွိျခင္း
၉။ နဖူးျပင္တြင္ ပရေမသြတံက်င္ သံုးခုကဲ့သို႕ေသာ သြင္ျပင္
ပံုသ႑ာန္ရွိျခင္း......
ကိုယ္လကၡဏာ ၁၆ ရပ္
၁။ တက္သစ္စ လေရာင္ႏွင္ ့တူေသာ ကိုယ္ေရာင္
၂။လကၤ်ာရစ္လည္ေသာအခ်က္
၃။လကၤ်ာရစ္လည္ေသာေဗြ
၄။ေရႊေသာအဆင္း
၅။နက္ေသာခ်က္
၆။ရွည္ေသာလက္
၇။ သိမ္ေမြ ့ေသာအဂၤါ
၈။ၾကီးၿမတ္ေသာ သားၿမတ္
၉။ဆင္ကဲ့သို ့သြားၿခင္း
၁၀။သိမ္ေမြ ့ေသာ ခါးရွိၿခင္း
၁၁။သိမ္ေမြ ့ေသာအဂၤါရွိၿခင္း
၁၂။ေကာင္းေသာကိုယ္ရွိၿခင္း
၁၃။ဖြံ ့ေသာေပါင္ရွိၿခင္း
၁၄။ကိုယ္ေမြးနည္းၿခင္း
၁၅။လိပ္ေက်ာကုန္းကဲ့သို ့အဂၤါရွိၿခင္း
၁၆။ၾကာပန္းကဲ့သို ့ေမႊးေသာကိုယ္နံ ့ရွိၿခင္း
စိတ္လကၡဏာ ၆ ရပ္
၁။ၿဖဴစင္ေသာႏွလံုးရွိၿခင္း
၂။ေကာင္းေသာအက်င့္သီလရွိၿခင္း
၃။စင္ၾကယ္ေသာအက်င့္သီလရွိၿခင္း
၄။ခ်စ္ခင္ႏွစ္သက္ၿခင္း
၅။အရိပ္ေၿခသိၿခင္း
၆။ေၿဖာင့္မတ္တည္ၾကည္ၿခင္း
လည္ပင္းလကၡဏာ ၁ ရပ္
၁။လည္ေရး ၃ ဆင့္ရွိၿခင္း
အသံလကၡဏာ ၃ရပ္
၁။ ဟသၤာသံႏွင့္တူေသာ အသံရွိၿခင္း
၂။အဆိုအမိန္ ့ႏွင့္သာယာေသာအသံရွိၿခင္း
၃။ဥၾသသံႏွင့္တူေသာအသံရွိၿခင္း
မ်က္ႏွာလကၡဏာ ၈ ရပ္
၁။လၿပည္ ့၀န္းႏွင္ ့တူစြာရွိၿခင္း
၂။ရွည္ေသာမ်က္ႏွာရွိၿခင္း
၃။နီေသာႏွဳတ္ခမ္းရွိၿခင္း
၄။ၿဖိဳးေမာက္ေသာႏွာတံရွိၿခင္း
၅။ၿပည္ ့ၿဖိဳးေသာပါးရွိၿခင္း
၆။မွဲ ့ ၀က္ၿခံ ကင္းစင္ေသာ နဖူး၌ ေၿဖာင့္မတ္ေသာ တေခ်ာင္းတည္းေသာ တံခြန္
အလံတိုင္ အေရးရွိၿခင္း
၇။သံတၱိမည္ေသာအေရးကဲ ့သို ့ နဖူးၿပင္၌ အေရးရွိၿခင္း
၈။ခြ်န္ေသာႏွာေခါင္းရွိၿခင္း
သြားလကၡဏာ ၁ ရပ္
၁။ ခရုသင္းပြင့္သစ္စကို လႊႏွင္ ့ၿဖတ္သည္ ့အလား
မယိုင္မက်ဲမေပါက္ေသာေခ်ာေမာေသာ နဂိုၿဖင့္ ၾကည္၍ တင့္တယ္ၿခင္း
မ်က္ေစ့လကၡဏာ ၄ ရပ္
၁။မက်ဥ္းမက်ယ္ တင့္တယ္ေသာ မ်က္ေစ ့ရွိၿခင္း
၂။ၾကာညိဳပန္းႏွင္ ့တူေသာမ်က္ေစ့ (အခ်ိဳ ့မွာ ၿပာညိဳေသာ မ်က္ေစ့ရွိၿခင္း)
၃။သမင္မ်က္ေစ့ႏွင့္တူေသာ မ်က္ေစ့ ရွိၿခင္း
၄။ပဒုမၼာၾကာကဲ ့သို ့ အခ်ိဳ ့မွာ စိမ္းေသာမ်က္ေစ့ ရွိၿခင္း
ဆံပင္လကၡဏာ ၃ ရပ္
၁။အဖ်ားေကာ့ေသာ ဆံပင္ရွိၿခင္း
၂။ရွည္ေသာ ဆံပင္ရွိၿခင္း
၃။သိမ္ေမြ ့ေသာ ဆံပင္ရွိၿခင္း
ဤကားေကာင္းၿခင္း ၆၄ ရပ္တည္း .....။
CCNA Sample Questions
CCNA Sample Questions
640-801
The Building Scalable Cisco Certification exam is a qualifying exam for the CCNA certifications. The exam will certify that the successful candidate has important knowledge and skills necessary to use advanced IP addressing and routing in implementing scalability for Cisco routers connected to LANs and WANs. The exam covers topics on Advanced IP Addressing, Routing Principles, Configuring the EIGRP, Configuring the Open Shortest Path First Protocol, Configuring IS-IS, Manipulating Routing Updates, and configuring basic BGP.
We provide CCNA sample questions that help test your preparedness for taking the actual cisco certification exam. CCNA 640-801 sample questions help in consolidating your concepts, preparation and also as exam cram. Each CCNA sample question is based on respective vendors published exam objectives and designed to help attain cisco certification.
- Which of the following about Routing Protocols is correct? (choose all that apply)
- RIP 2 is a Distance Vector Protocol
- The RIP 1 uses bandwidth and delay as the metric
- RIP 1 uses subnet mask
- The holdown timer value for RIP is 240 sec
- The Update timer value of IGRP is 90 sec
Answer :A & E
- RIP 2 is a Distance Vector Protocol
- What command is used to delete the configuration stored in NVRAM?
- erase startup-config
- erase running-config
- delete nvram
- erase nvram
Answer :A
- erase startup-config
- What is the maximum number of hops that OSPF allows before marking a network as unreachable?
- 15
- 16
- 255
- Unlimited
- 99
Answer :D
- 15
- Which routing protocol would allow a network administrator scalability, VLSM support and minimize overhead if the network administrator wants to merge different networks all using routers from multiple vendors?
- VTP
- RIP
- IGRP
- EIGRP
- OSPF
Answer :E
- VTP
- Two routers Rtr1 and Rtr2 are both configured with RIP only. What will be the result when Rtr1 receives a routing update that contains a higher cost path to a network already in its routing table?
- The update information will replace the existing routing table entry.
- The update information will be added to the existing routing table.
- The existing routing table entry will be deleted from the routing table and all routers will exchange routing updates to reach convergence.
- The update will be ignored and no further action will be taken.
Answer :E
- The update information will replace the existing routing table entry.
- Two routers Rtr1 and Rtr2 are both configured with RIP only. What will be the result when Rtr1 receives a routing update that contains a higher cost path to a network already in its routing table?
- The update information will replace the existing routing table entry.
- The update information will be added to the existing routing table.
- The existing routing table entry will be deleted from the routing table and all routers will exchange routing updates to reach convergence.
- The update will be ignored and no further action will be taken.
Answer :E
- The update information will replace the existing routing table entry.
- What switching method examines the destination MAC address as the frame is being received and then begins forwarding the frame prior to receiving the entire frame?
- Modified Cut Through
- Store and Forward
- Cut Through
- Fragment Free
Answer :C
- Modified Cut Through
Next »
CCNA Sample Question Number : 1-7 | 8-14 | 15-20 | 21-28 | 29-35 | 36-40 | 41-44 | 45 | 46-47 | 48-49 | 50-52 | 53-55
MCSE Sample Questions : General MCSE Sample Questions
MCSE Sample Questions : General MCSE Sample Questions
General MCSE Sample Questions
Following are some MCSE sample questions:
- What is the GUI tool used to build the UNATTEND.TXT file included with the Windows 2000 Resource Kit?
- SETUPMGR.EXE
- UNATTEND.EXE
- PREBUILD.EXE
- SYSLOAD.SYS
- SETUP.EXE
Answer: A
- SETUPMGR.EXE
- Which component of the Windows 2000 Executive is responsible for handling input and output from installed devices?
- The Device Manager
- The Cache Manager
- The I/O Manager
- The Device Manager
- none of the above
Answer: C
- The Device Manager
- Which of the following IRQs are used for LPT1?
- 1
- 3
- 5
- 7
- 9
Answer: D
- 1
- Which layer(s) of the OSI model is/are included in the NDIS specification?
- 1
- 2
- 3
- 4
- 5
Answer: B
- 1
- Windows 2000 Professional can access drives compressed with DriveSpace.
- TRUE
- FALSE
Answer: B
- TRUE
- What should the impedance on RG-58 cable be?
- 50
- 75
- 90
- 93
- 98
Answer: A
- 50
- What is another name for 10BaseT?
- Baseband
- Broadband
- Thicknet
- Thinnet
- Twisted Pair
Answer: E
- Baseband
- Which of the following categories for UTP has the least expensive cable?
- 1
- 2
- 3
- 4
- 5
Answer: C
- 1
- Which of the following modules manages bindings in NDIS?
- Protocol manager
- Binding manager
- Redirector
- The registry
- None of the above
Answer: A
- Protocol manager
- If a network has a Windows NT domain controller, what kind of network is it?
- WAN
- High-speed
- Peer-to-peer
- Server-based
- Server-to-server
Answer: D
- WAN
Next »
MCSE Sample Question Number :
1-10|
11-20|
21-30|
31-40|
41-50|
51-60|
61-70|
71-80|
81-90|
91-100|
101-110|
111-120|
121-130|
131-140|
141-150|
151-160
A+ Sample Questions A+ Operating Systems Sample Questions
A+ Sample Questions
A+ Operating Systems Sample Questions
- You can run Windows 3.1 or 3.11 without loading himem.sys.
- true
- false
Answer :B
- true
- You must have himem.sys loaded before you can load DOS high.
- true
- false
Answer :A
- true
- When DOS is loaded high it is placed in the HMA (high memory area). This is located:
- between 640k and 1024k
- the first 64k above 1024k
- anywhere in extended memory
- anywhere in expanded memory
- in the first UMB
Answer :B
- between 640k and 1024k
- To load DOS high you must place a statement in config.sys. It is:
- loadhigh DOS
- device=DOSHIGH
- dos=high
- lh dos
- load dos high
Answer :C
- loadhigh DOS
- The reason you load DOS high is to:
- optimize DOS to run faster
- free up more extended memory
- free up more conventional memory
- free up more expanded memory
- avoid i/o conflicts
Answer :C
- optimize DOS to run faster
- The upper memory area is located:
- between 640k and 1024k
- above 1 meg
- between 512k and 840k
- anything above 1024k
- between 1000k and 1024k
Answer :A
- between 640k and 1024k
- Extended memory is:
- paged memory
- anything above 1024k
- anything above 640k
- anything accessed by rom
- anything above 1 meg
Answer :B
- paged memory
- Extended memory is managed by:
- emm386.exe
- DOS
- himem.sys
- ram controller
- rom bios
Answer :C
- emm386.exe
- Expanded memory is:
- paged memory
- anything below 1 meg
- anything above 640k
- anything above 1024k
- between 640k and 1024k
Answer :A
- paged memory
- Expanded memory is managed by:
- himem.sys
- emm386.exe
- DOS
- rom bios
- CPU
Answer :B
- himem.sys
« Previous || Next »
A+ Operating Systems Sample Question Number : 1-10 | 11-20 | 21-30 | 31-40 | 41-50 | 51-60 | 61-70 | 71-80 | 81-90 | 91-100 | 101-110 | 111-120 | 121-130 | 131-140 | 141-150 | 151-160 | 161-170 | 171-180
A+ Sample Questions A+ Core Hardware practice questions
A+ Core Hardware practice questions
What should you use to clean the plastic cover on your monitor or PC? Select all that apply.
alcohol
damp sponge
lint-free cloth
WD-40
mild soap solution
Answer :C, E
Dust in a computer actually increases the size of the magnetic fields inside it. This is not good, so you must occasionaly dust, I trust. What's the best way to do this?
reverse vacuum
any small vacuum device
blow real hard on the system board
use a lint-free cloth and wipe gently
non-static compressed air
Answer :E
What's the best way to protect your hard drive data?
regular backups
periodically defrag it
run chkdsk at least once a week
run scandisk at least once a week
run a regular diagnostic
Answer :A
A CRT's grid voltage can be as high as:
110 volts
5000 volts
15,000 volts
50,000 volts
1000 volts
Answer :C
A monitor's CRT (cathode ray tube) can pack quite a wallop of a charge even if it's been turned off for several days or more Before you service a monitor, you must discharge the CRT using a tool specific for that purpose. Before you do the discharge, what must you do first?
make sure the monitor is not connected to a PC
make sure the monitor is unplugged
make sure the monitor is turned off
make sure the brighness is turned down
make sure your life insurance policy is paid up
Answer :B
ESD is least likely to cause damage to which components? Select all that apply.
keyboard
mouse
cmos chips
microprocessor
adapter cards
Answer :A, B
Which of the following are input devices only? Select all that apply.
modem
mouse
keyboard
SCSI controller
video card
Answer :A, B
Which of the following are both input/output devices? Select all that apply.
modem
SCSI controller
keyboard
mouse
monitor
Answer :A, B
Which component stores an electrical charge?
diode
rectifier
capacitor
resistor
transistor
Answer :C
On PC power supplies, the wire attached to pin one is usually:
blue or red
blue or white
red or black
red or white
white or orange
Answer :E A+ Sample Questions
A+ Core Hardware practice questions
If the voltage on pin 1 of the power supply is not in the range of ______ volts, the PC will not boot.
10 - 20
1 - 5
50 - 110
15 - 25
2.5 - 5
Answer :E
The output voltages of a PC power supply are in the form of _____ current.
AC
DC
amperage
resistive
trickle
Answer :B
The output voltages from a PC power supply are:
+20, +110, -20, -110
+5, +12, -5, -12
+110, -110, +25, -25
+10, -10, +20, -20
+110, -15, +25, -5
Answer :B
A spike is a sharp and sudden rise in voltage It's duration is usually measured in:
nanoseconds
milliseconds
seconds
minutes
picto seconds
Answer :B
A brownout is defined as:
a slightly elevated voltage lasting from seconds to minutes or more
a slightly decreased voltage lasting from seconds to minutes or more
complete power out lasting a few minutes
alternating power out, power on lasting a few minutes
has nothing to do with electricity
Answer :B
Resistance is measured in units of:
ohms
farads
helids
amperes
volts
Answer :A
Current is measured in units of:
volts
amps
ohms
farads
diodes
Answer :B
Capacitance is measured in units of:
volts
amps
farads
neutrinos
anti-neutrinos
Answer :C
Voltage is measured:
in parallel
in series
after breaking the circuit
after checking resistance
after checking current
Answer :A
Resistance is measured:
in parallel
in series
after breaking the circuit
after checking voltage
after checking current
Answer :C A+ Sample Questions
A+ Core Hardware practice questions
Current is measured:
in parallel
only when you turn the device off first, then connect your meter to the device in series, then turning it back on
after checking voltage
only when you turn the device off first, then touch the correct meter leads to the corresponding terminals
only on an open circuit
Answer :B
AC ripple is unwanted AC current where there should only be direct current. When AC is rectified to DC, it is difficult, if not impossible to get rid of all the AC voltage, though a certain amount is tolerable You want to measure the AC voltage in a DC circuit, so you set your meter to measure:
DC voltage
AC voltage
DC current
AC current
ripple
Answer :B
Anti-static plastic bags are:
conductive
non-conductive
part rubber, part plastic
90% non-porous
magneto-resistive
Answer :A
POST stands for:
positive operating system test
particle of static transfer
power on self test
printer online static test
printer online standard test
Answer :C
POST is done when the PC is: (select all that apply)
warm booted
first turned on
CTRL-ALT-DELETE booted
restarted with the reset button
giving a numeric error code
Answer :A, C
The POST routine, which counts system board ram first, is stored in:
ram
microprocessor
rom bios
cmos
8259 POST controller
Answer :C
A 1xx (x can be any digit) POST error code indicates a problem with the:
video
ram or rom
hard drive
system board
first adapter card
Answer :D
A 2xx POST error code indicates a problem with:
ram or rom
hard drive
system board
second adapter card
cmos battery
Answer :A
A 3xx POST error code indicates a problem with:
mouse
keyboard
floppy drive
video adapter
monitor
Answer :B
A 4xx, 5xx, or 24xx POST error code indicates a problem with:
hard drive
IRQ controller
video adapter
keyboard
floppy drive
Answer :C A+ Sample Questions
A+ Core Hardware practice questions
OK, last numeric error code check: A 17xx indicates a problem with:
cmos
rom bios
DMA controller
hard drive or controller
power supply
Answer :D
A 6xx indicates a problem with the:
floppy drive (see, I kept my word)
Answer :A
A parity error usually indicates a problem with:
memory
hard drive
hard drive controller
i/o controller
power supply
Answer :A
How many bits in a byte?
16
8
255
10
2 to the 9th power
Answer :B
PCMCIA stands for "personal computer memory card international association". Just take my word for it. This association sets forth the standards for the PC card PC cards are: (select all that apply)
hot swappable
not hot swappable
plug and play
not plug and play
used only in mainframes
Answer :A, C
Type one PC cards:
are used only in desktops
are no longer being produced
are the thinnest of the PC cards
don't exist
have their own power source
Answer :C
To start the setup program (or cmos setup), there is usually a key or set of keys you must press simultaneously. Some of the ones used by various PCs are listed below. Select all that are correct.
CTRL-ALT-ENTER
CTRL-ALT-DELETE
CTRL-ALT-S
DELETE
F10
Answer :A, C, D & E
The floppy drive uses which DMA (direct memory access) channel?
5
4
1
9
2
Answer :E
You do a DIR on a diskette, remove it and insert another, and get the same DIR listing from the first diskett. This is known as a "phantom" directory, and it is caused by: (select all that apply)
line 34 on the floppy cable is bad
bad microprocessor
defective diskette
defective floppy drive
failing hard drive
Answer :A, D
The power connector on a floppy drive is called a:
berg connector
molex connector
has no formal name
mini-molex
hybrid connector
Answer :A A+ Sample Questions
A+ Core Hardware practice questions
On most floppy cables, the order for the connectors is:
adapter, drive A, drive B
adapter, tape drive connector, drive A
adapter, drive B, drive A
adapter, drive A or B, drive A or B
depends on cmos settings
Answer :C
The print from a dot-matrix printer is light and uneven. This is most likely caused by:
defective printhead
worn ribbon
paper not advancing properly
defective carriage assembly
worn platten
Answer :B
The print from a dot-matrix printer is sometimes light, sometimes dark. This is most likely caused by:
worn ribbon
paper not advancing properly
worn platten
defective printhead
defective carriage assembly
Answer :B
On a dot-matrix printer, regular lube maintainence should be followed, but this component should never be lubed:
platten bearings
carriage rails
printhead
paper advance bearings
carriage bearings
Answer :C
When you move a mouse, the mouse pointer is positioned via:
GPS
analog pulses
pressure sensors
friction detectors
pulses of light
Answer :E
Your laser printer is on, you hear the fan running, but it won't print. What is the first thing you should check?
that all the cables are connected securely
that the correct print driver is installed
that the printer is online
that the printer has paper
that the printer is not jammed
Answer :C
In laser printing, there are six steps the printer follows. What comes between the conditioning phase and the developing phase?
transer phase
writing phase
fusing phase
cleaning phase
nothing
Answer :B
During the laser printer's conditioning phase a uniform charge of _______ is placed on the photosensitive drum.
+1000 volt
+600 volts
-600 volts
-1000 volts
+ 12 volts
Answer :C
In order to place this charge on the drum, the primary corona wire must emit a charge of:
+15000 volts
-110 volts
+110 volts
-6000 volts
+6000 volts
Answer :D
The transfer corona uses a/an ______ charge to attract the toner to the paper.
negative
positive
alternating
magnetic
electronic pulse
Answer :B A+ Sample Questions
A+ Core Hardware practice questions
Your laser printer gives you an error code 50. This is usually caused by a defective:
formatter board
DC controller
fuser assembly
high voltage power supply
laser unit
Answer :C
Laser printer toner is composed primarily of: (select all that apply)
particles of plastic resin
saw dust
talc
ash
iron oxide (rust)
Answer :A, E
You plug a power supply's connectors onto the system board You know you did it correctly because:
the two sets of black wires are facing the outside edge of the system board
the two sets of black wires are together in the middle
one set of black wires is outside, one is toward the inside
all are facing the power supply
it doesn't matter as long as they can be plugged in
Answer :B
An important first step in troubleshooting which component in a laser printer is causing a jam is to:
note where in the paper path the paper stops
check all voltages
look up error codes
turn the printer off, then on again
remove the jammed paper
Answer :A
Select the best choice for cleaning laser toner from clothing:
warm soapy water
alcohol
dry clean
clean cloth with cool water
pure dishwashing detergent
Answer :D
During the fusing process, toner is:
dry pressed into the paper
electrically bonded to the paper
melted into the paper
glued to the paper
high pressure sprayed onto the paper
Answer :C
On the PC side, the printer port is a:
25 pin female serial connector
15 pin female parallel connector
25 pin male serial connector
15 pin female serial connector
25 pin female parallel connector
Answer :E
ISA is a ___ bit technology.
8/16
16/32
4/8
12/24
32/64
Answer :A
A device which supports DMA is able to i/o with memory by and large bypassing the CPU. Bus mastering takes this a step further by allowing a bus-master device to take charge of the data bus and send data to other devices, including memory, and also allows two bus master devices to talk to each other without requiring the services of the CPU. Does ISA support bus mastering?
no
yes
yes, but only one device
yes, but only in a Pentium
yes, in a DX, but not an SX
Answer :B
EISA and MCA devices do not have jumper settings. How are they configured? Select all that apply.
CMOS setup
Windows setup
through DOS
dip switches
EISA configuration utility or IBM reference diskette (MCA)
Answer :E + Sample Questions
A+ Core Hardware practice questions
You can have EISA and MCA devices in the same PC.
true
false
Answer :B
PCI devices do not have jumper settings or dip switches. How are they configured? Select all that apply.
CMOS setup
an installation utility from the manufacturer
through DOS
Windows setup
they are always self-configuring
Answer :A, B
You can place an ISA device in an EISA slot.
true
false
Answer :A
You can place an EISA device in an ISA slot.
true
false
Answer :B
You can only place an MCA device in an MCA slot.
true
false
Answer :A
Select each bus architecture that supports 32 bit data transfers.
ISA
EISA
MCA
PCI
PCMCIA
Answer :B, C & D
Select each bus architecture that supports bus mastering.
EISA
PCI
VLB
MCA
PCMCIA
Answer :A, B & D
A switching power supply steps down voltage by means of:
transformers
a network of resistor conduits
turning off and back on in rapid cycles
a network of capacitors
there is no such thing
Answer :C
Pick the correct choice for the 8088 CPU.
16 bit word size, 8 bit data path
8 bit word size, 8 bit data path
16 bit word size, 16 bit data path
4 bit word size, 8 bit data path
8 bit word size, 16 bit data path
Answer :A
Pick the correct choice for the 80386SX CPU.
16 bit word size, 16 bit data path
32 bit word size, 16 bit data path
8 bit word size, 32 bit data path
32 bit word size, 8 bit data path
32 bit word size, 32 bit data path
Answer :B
Pick the correct choice for the 80486DX CPU.
32 bit word size, 16 bit data path
64 bit word size, 32 bit data path
32 bit word size, 32 bit data path
32 bit word size, 16 bit data path
32 bit word size, 64 bit data path
Answer :C
What is the first CPU to include an internal math coprocessor?
386DX
486SX
486DX
Pentium
Pentium Pro
Answer :C
A+ Sample Questions A+ Core Hardware practice questions
A+ Core Hardware practice questions
RS-232 is a standard that applies to:
serial ports
parallel ports
game ports
networks
digital frequencies
Answer :A
Comm ports use: (select all that apply)
9 pin male connector
14 pin female connector
25 pin male connector
edge connector
parallel connector
Answer :A, C
Before a modem transmits, it send a:
RTS
DTR
DSR
RQS
TRX
Answer :A
RTS stands for:
ready to start
ready to switch
request to send
request to scan
ready to set
Answer :C
In modem terminology, CD stands for:
collect data
call data
cease deliver
carrier detect
comm detect
Answer :D
UART is a type of serial chip. Its letters stand for:
unidirectional access regarding transmission
universal asynchronous receiver/transmitter
upper advanced real transfer
unable all restore t-bits
use all rom types
Answer :B
Select all true statements:
com1 and com3 share the same IRQ
com1 and com4 share the same IRQ
com2 and com3 share the same IRQ
com2 and com4 share the same IRQ
com1 and com2 share the same IRQ
Answer :A, D
In modems that support more than 300 baud, baud and bps do not mean the same thing.
true
false
Answer :A
"bps" stands for bits per second. Baud is the number of discrete signals per second One discrete signal can encode more than one bit. Hence, a 9600 bps modem actually operates at 2400 baud. However, in common non-techie terminology, baud and bps are used synonymously, though that is not technically correct. These are all true statements.
true
false
Answer :A
________ is the term used to refer to the process of two modems establishing communications with each other.
interacting
handshaking
connecting
linking
pinging
Answer :B A+ Sample Questions
A+ Core Hardware practice questions
ISDN stands for:
internal select data nulls
integrated services digital network
interval set down next
interior sector direct none
inferior sector data net
Answer :B
Your modem does not respond when you try to dial out. You try another modem on another computer and get the same result. What is the most likely problem?
defective modem
defective computer
software bug
bad phone line
virus
Answer :D
You have a serial scanner connected to your computer configured to use com3. It is turned on. Your modem is using com1, and you can't dial out. What is the most likely problem?
everything should work ok
you have an i/o conflict
you have a conflict with IRQ 4
you have a loose connection
you have a conflict with IRQ 3
Answer :C
What is the i/o address for com1?
3e8
3bc
5f8
3f8
008
Answer :D
What is the i/o address for com2?
2vb
2f8
8f8
330
e8e
Answer :B
What is the i/o address for com3?
3e8
345
ff8
5e8
be8
Answer :A
What is the i/o address for com4?
4e7
e8e
be0
cb8
2e8
Answer :E
Before sending data, a modem sends a request to send signal, or RTS.
true
false
Answer :A
ISDN uses _______________ technology.
only digital
digital and analog
only analog
neither digital nor analog
mostly digital
Answer :A
A COM port is a _______ port.
parallel
serial
static
multi
scsi
Answer :B A+ Sample Questions
A+ Core Hardware practice questions
Modems use ________________ transmission.
synchronous
asynchronous
timed interval
ata
bank
Answer :B
CD-Roms typically hold ______ of data.
100 meg
500 meg
650 meg
1000 meg
350 meg
Answer :C
The terms "red book", "yellow book", and "orange book" refer to:
scsi
ide
floppy drive technology
CD-Rom standards
none of the above
Answer :D
CD-Roms are read by _________.
magnetic heads
electronic sensors
stepper motors
laser diodes
titanium servos
Answer :D
Which of the following can cause CDs to be misread? Select all that apply.
smudges
finger prints
scratches
cracks
slight melting
Answer :A, B, C, D & E
CD-Rom drives typically have which of the following interfaces? Select all that apply.
serial
parallel
ide
scsi
esdi
Answer :A, B & C
CD-Rom drives have which connectors? Select all that apply.
molex
berg
data cable
audio cable
arcnet
Answer :A, C & D
In a computer with an eide adapter, where should you connect an ATA CD-Rom drive?
on the floppy bus
on the primary ide
on the secondary ide
on the scsi bus
none of the above
Answer :C
Your IDE CD-Rom drive is attached to the primary IDE adapter with our hard drive. How should its jumpers be set?
as a master
as a slave
as neutral
auto detect
to 001
Answer :B
What does MSCDEX.EXE do?
configures hard drives
it's a scsi driver
bios setup
It's a CD-Rom DOS driver
nothing, I just made it up
Answer :D A+ Sample Questions
A+ Core Hardware practice questions
A CD-Rom drive always uses IRQ:
9
10
11
5
depends on the adapter it's attached to
Answer :E
If a computer's bios allows it, you can boot from a CD-Rom.
true
false
Answer :A
A single speed CD-Rom drive transfers data at:
1 MB per second
100 bytes per second
20 million bits per second
186,282 bits per second
150 KBs per second
Answer :E
Your CD-Rom audio cable connects to the:
speaker
sound card (or motherboard if sound is integrated with it)
power supply
hard drive
bios
Answer :B
This statement is in autoexec.bat:
c:\dos\cdrom\mscdex /d:cdrom001 /l:e /m:10 /v
This statement is in config.sys:
device=c:\cdrom\atapicd.sys /d:cd001
Your CD-Rom drive is not working. What is wrong?
the "v" switch in autoexec.bat is invalid
the device name is not the same in both files
the "m" switch in autoexec.bat is set too high
config.sys is not using the dos directory
nothing, it should work
Answer :B
Which of the following are SCSI issues? Select all that apply.
unique id settings
limited cable length
parity
passive termination
active termination
Answer :A, B, C, D & E
On some older SCSI adapters, the boot hard drive must be set to id#: (as a side note, some of the older IBM SCSI PCs had to have the boot hard drive set to id 6, but this question deals primarily with most other PC makes and clones)
2
3
0
9
11
Answer :C
You have a PC with a SCSI adapter built into the system board It has only one connection (internal), which is used for your hard drive, CD-Rom drive, and tape drive. Your boss wants to connect a SCSI scanner to the PC, so you install a SCSI adapter with an external connection to support the scanner. Now you have a PC with two SCSI adapters. SCSI adapters normally use id# 7, which the onboard adapter is set for. The adapter you installed should: (select all that apply)
use a different id
use id 7 also
not use an id
use a different IRQ
be checked for fleas
Answer :B, D
You run a super wing-ding diagnostic program on your PC, and it reports that your hard drive, microprocessor, ram, and video card have seen better days. To resolve this problem you should:
replace each part one at a time, rerunning the diagnostic before replacing the next part.
check to see if you have a software problem
replace everything at once and rerun the diagnostic
get another copy of the diagnostic program
run an exhaustive memory check
Answer :B
Whenever you have a hardware resource conflict, it will more likely be an IRQ conflict rather than an i/o conflict because:
there are alot more i/o addresses than IRQs.
the bios sometimes has more of a problem controlling IRQs
i/o addresses cannot conflict
software tends to correct i/o conflicts
software tends to mess up IRQs
Answer :A A+ Sample Questions
A+ Core Hardware practice questions
SCSI adapters usually don't need drivers, just the devices that interface with them.
true
false
Answer :B
Most SCSI-2 devices will work fine with SCSI-1 adapters.
true
false
Answer :A
Single-ended SCSI or "regular" SCSI has one wire for each signal that needs to be sent along the SCSI bus. Differential SCSI has two wires for each signal that is sent. Differential SCSI cable lengths can be up to 25 meters. How long can single-ended SCSI cables be?
up to 50 meters
up to 100 meters
up to 6 meters
up to 14 meters
up to 3 meters
Answer :C
Your PC has both internal and external SCSI devices connected to one SCSI host adapter. Which devices should be terminated? Select all that apply.
the last internal device on the chain
the last external device on the chain
the host adapter
the host adapter and one external device
the PC
Answer :A, B
How many devices can connect to the typical SCSI adapter? Assume is has only one data connector.
7
8
20
10
depends on whether both internal and external devices are used
Answer :A
How many devices can be used on a single SCSI bus? Keep in mind that the SCSI host adapter counts as a device.
7
8
20
10
see number 54
Answer :B
What is the jumper setting on a SCSI device to configure it to use the fourth SCSI id? Remember, SCSI ids start with zero.
010
110
011
101
001
Answer :C
Which type of interface provides for the fastest data transfer?
IDE
SCSI
parallel
serial
ISA
Answer :B
In addition to i/o port addresses, SCSI adapters also use a range of rom addresses for their onboard bios.
true
false
Answer :A
SCSI-2 cables have how many pins?
40
25
50
72
100
Answer :C A+ Sample Questions
A+ Core Hardware practice questions
IDE cables have how many pins?
25
50
100
40
65
Answer :D
You are about to install a second IDE hard drive in a PC that has only one IDE adapter. Your first hard drive will still be the boot drive. How should the second drive be configured?
as a master
as a secondary
as a slave
as a primary
as auto-select
Answer :C
What is the maximum number of IDE drives that EIDE will support?
15
3
4
2
0
Answer :C
You are installing an IDE hard drive that will be your boot drive.
Which is the correct order of steps that need to be followed?
jumper properly, auto-detect(or configure manually) in cmos, low level format, high level format, partition
jumper properly, auto-detect(or configure manually) in cmos, partition, high level format with /s switch
jumper properly, partition, auto-detect(or configure manually in cmos, high level format with /s switch
jumper properly, auto-detect in cmos, regular format
jumper properly, partition, low level format, high level format
Answer :B
You are installing a SCSI hard drive that will be your boot drive. Which is the correct order of steps that need to be followed?
jumper for id 0, cmos setup, low level format, high level format
set id jumpers to all zeros, high level format, partition
set id jumpers to all zeros, partition, high level format
jumper for id 0, cmos setup, partition, high level format
set id jumpers to all zeros, high level format, partition
Answer :C
On a flat data cable, a red or blue stripe means:
ground
high voltage
null connection
pin 1
that it's an IDE or SCSI cable
Answer :D
Which of the following would be considered an FRU? Select all that apply.
hard drive
system board
ram
DMA controller
level 2 cache simm
Answer :A, B, C & E
Which of the following would not be considered an FRU?
hard drive
IRQ controller
any soldered IC
floppy drive
system board
Answer :A, B
You have a system that periodically locks up. You have ruled out software, and now suspect that it is hardware. What should you do first that could help you narrow it down to the component at fault?
rotate the ram
replace the ram
replace the level 2 cache simm
disable the CPU cache in cmos
replace the CPU
Answer :D
You have a PC with no video on a known good monitor. Pick the best order you should follow in tracking down the problem.
replace the video card, replace the monitor, replace the power supply, replace the system board, try a different monitor
check that PC and monitor are plugged in, check that monitor brightness is turned up, check that PC fan is running, remove all option cards
check PC supply voltages, replace video card, replace CPU
check that everything's plugged in, replace system board
check that everything's plugged in, replace hard drive, replace ram
Answer :B A+ Sample Questions
A+ Core Hardware practice questions
Most PCs give a single beep on bootup to indicate they are ok hardware wise. You boot your PC and don't get a beep. What should you check first?
system board
ram
microprocessor
power supply
speaker
Answer :E
What beep codes could indicate a system board or power supply failure? Select all that apply.
steady short beep
no beep
one long continuous beep tone
steady long beeps
one long, two short beeps
Answer :A, B, C & D
Your PC is continuously rebooting itself. Select all of the following that could be causing the problem.
bad PC power supply
faulty power at AC outlet
bad system board
defective adapter card
corrupt operating system
Answer :A, B, C, D & E
You have an old PC that you decide to upgrade with a 1 gig IDE hard drive You find that you can't configure cmos to see the entire hard drive. The best you can do is 540 meg. What is the fix?
get a newer PC
manually input the sectors, cylinders, and heads of the hard drive
put multiple partitions on the hard drive
make the bios think it's a SCSI drive
use a device driver that makes the bios see the drive as simply a block storage device, or upgrade the bios if possible
Answer :E
A sound card typically uses which IRQ?
6
5
15
1
it doesn't use an IRQ
Answer :B
Your IDE hard drive is not spinning up when you turn on the PC What is the most likely problem.
bad data cable
incorrect jumper setting on drive
loose molex connector
virus
bad system board
Answer :C
You have a PC with no video. Which of the following is LEAST likely to be causing the problem?
defective ram (bank zero)
defective microprocessor
crashed hard drive
loose video card
low AC outlet power
Answer :C
I once had a PC with no video. I replaced the system board, CPU, and video card, and still had no video. I then replaced the IDE cable and fixed the problem. Am I telling the truth?
no, you're just pulling everyone's leg
you betcha!
Answer :B
A virus can mimick just about any hardware symptoms you can think of.
true
false
Answer :A
A static jolt of as little of ____ volts can fry most any PC integrated circuit.
200
30
1000
200
500
Answer :B A+ Sample Questions
A+ Core Hardware practice questions
A human cannot feel a static discharge as high as ____ volts.
200
2000
10000
50000
50
Answer :A
ESD is ___________.
electronic stasis device
electrostatic discharge
electric surge device
electronic system driver
forget it, I can't think of any more words for these letters
Answer :B
What's the best way to prevent damaging your PC with static electricity?
place your PC on a rubber mat
wear leather soled shoes
periodically touch a safe ground point on the PC to discharge yourself
static electricity doesn't really hurt a PC
wear an ESD wrist strap
Answer :E
What is EMI? (uh, oh - here we go again)
electro-magnetic interference
electronic maintainence inquiry
Answer :A
You're on your PC at midnight and an electric storm pops up. What's the best way to protect your PC.
you don't worry; you have a lightning rod on your house
you don't worry; you've got a surge protector on your PC
you don't worry; you've got a surge protector on your PC and phone line to your modem
unplug the PC and remove phone line from the modem
stop standing on it
Answer :D
Something as small as a ________ on a drive platter can cause your hard drive to crash. Select all that apply.
human hair
dust particles
finger print
a .001 micron high imperfection
accumulation of smoke particles
Answer :A, B, C & E
When your hard drive crashes from any of the correct selections in the question above, or from dropping it, it is known as head-to-disk interference, or HDI.
true
false
A
You should never put floppy drives, hard drives, or even VCR tapes or cassette tapes on top of speakers (or near any other source of magnetism) because of:
RFI
EMI
EXE
FYI
IOU
Answer :B
Static electricity thrives is which type of environment?
cold and humid
warm and humid
warm and dry
cold and warm
cold and dry
Answer :E
Which is the most difficult environmentally to dispose of?
floppy drives
hard drives
power supplies
CRTs
system boards
Answer :D
Computer Questions for Bank Exams
1. RAM stands for :
(A) Read Access Memory
(B) Random Access Memory
(C) Random Assigned Memory
(D) All of these
(E) None of these
2. Data in RAM are :
(A) Volatile in nature
(B) Non-volatile in nature
(C) Both (A) & (B)
(D) All of these
(E) None of these
3. BIOS stands for :
(A) Basic Input Output System
(B) Basic Instruction Output System
(C) Basic Interface Output System
(D) All of these
(E) None of these
4. RAM in its commercial forms are available as :
(A) SIMM
(B) DIMM
(C) Both (A) & (B)
(D) CPSB
(E) None of these
5. Which of the following requires refreshing during retaining the data?
(A) DRAM
(B) SRAM
(C) Virtual Memory
(D) FDD
(E) None of these
6. Refresh Rate of monitor is measured in :
(A) Hz
(B) Meter
(C) Volts
(D) Amp.
(E) None of these
7. Which of the following meaning is used between CPU & RAM to speed up the processing power of a CPU?
(A) Virtual Memory
(B) DRAM
(C) Flash Memory
(D) Cache Memory
(E) None of these
8. Which of the following is lowest in memory hierarchy?
(A) Cache memory
(B) Secondary memory
(C) Registers
(D) RAM
(E) None of these
9. Which of the following is an input device?
(A) Keyboard
(B) VDU
(C) Both (A) & (B)
(D) Dvu
(E) None of these
10. CRT stands for :
(A) Character Ray Tube
(B) Cathode Ray Tube
(C) Colour Ray Tube
(D) All of the above
(E) None of these
11. Which of the following is a GUI device :
(A) Keyboard
(B) Mouse
(C) OMR
(D) All of these
(E) None of these
12. LCD stands for :
(A) Liquid Crystal Display
(B) Laser Crystal Display
(C) Light Crystal Display
(D) All of these
(E) None of these
13. Such types of printers, in which the printing head contacts with the paper in printing process, are called as :
(A) Impact Printer
(B) Non-Impact Printer
(C) Laser Printer
(D) All of these
(E) None of these
14. Which of the following is a type of optical media?
(A) FDD
(B) HDD
(C) CD
(D) Magnetic Tape
(E) None of these
15. DVD stands for :
(A) Digital Video Disk
(B) Digital Versatile Disk
(C) Both (A) & (B)
(D) All of these
(E) None of these
16. Which of the following is an input device?
(A) VDU
(B) Printer
(C) Plotter
(D) MICR
(E) None of these
17. Identify the odd one :
(A) Storage tape memory
(B) Magnetic disc memory
(C) Optical disc memory
(D) Read only memory
(E) None of these
18. Nibble describes a bits combination of :
(A) 5 bits
(B) 6 bits
(C) 7 bits
(D) 4 bits
(E) None of these
19. A Byte constitutes of :
(A) 9 bits
(B) 8 bits
(C) 7 bits
(D) 4 bits
(E) None of these
20. Memory in a PC is addressable through :
(A) Bits
(B) Byte
(C) Nibble
(D) All of these
(E) None of these
21. One Kilo Byte represents :
(A) 1024 bytes
(B) 1000 bytes
(C) 100 bytes
(D) 1064 bytes
(E) None of these
22. Basic building block for a digital circuit is :
(A) Word
(B) Logic Gate
(C) Processor
(D) BUS
(E) None of these
23. Which of the following is a logic gate?
(A) AND
(B) OR
(C) CPU
(D) Both (A) & (B)
(E) None of these
24. The base of binary number is :
(A) 2
(B) 16
(C) 8
(D) 10
(E) None of these
25. ASCII stands for :
(A) American Standard Code for Institute Interchange
(B) American Standard Code for Information Interchange
(C) American Standard Code for Information Institute
(D) All of these
(E) None of these
Answers:
1. (B) 2. (A) 3. (A) 4. (C) 5. (A) 6. (A) 7. (D) 8. (B) 9. (A) 10. (B)
11. (B) 12. (A) 13. (A) 14. (C) 15. (B) 16. (D) 17. (D) 18. (D) 19. (B)
20. (B) 21. (A) 22. (B) 23. (D) 24. (A) 25. (B)
1. Who is called as ‘‘Father of Computers’’?
(A) Charles Babage
(B) Blaise Pascal
(C) Hollirth
(D) All of these
(E) None of these
2. The first Digital Computer introduced, was named as :
(A) Univac
(B) Mark-I
(C) Eniac
(D) All of these
(E) None of these
3. How many generations, computer can be classified?
(A) 4
(B) 5
(C) 3
(D) 6
(E) None of these
4. First Generation Computers contain :
(A) Transistors
(B) Vacume Tubes
(C) LSI
(D) VLSI
(E) None of these
5. II Generation Computers are made of :
(A) Vaccume Tubes
(B) Transistors
(C) LSI
(D) VLSI
(E) None of these
6. IV Generation Computers contain :
(A) LSI
(B) Vaccume Tubes
(C) All Technology
(D) Transistors
(E) None of these
7. Vth Generation Computers are based on:
(A) Artificial Intelligence
(B) Programming Intelligence
(C) System Knowledge
(D) All of these
(E) None of these
8. Computers, combine both measuring and counting, are called :
(A) Analog
(B) Digital
(C) Hybrid
(D) All of these
(E) None of these
9. In world today, most of the computers are :
(A) Digital
(B) Hybrid
(C) Analog
(D) Complex
(E) None of these
10. In any computer installation, how many elements consists?
(A) 2
(B) 4
(C) 3
(D) 1
(E) None of these
11. Physical structure of computer is called :
(A) Software
(B) Hardware
(C) Humanware
(D) All of these
(E) None of these
12. A computer can perform, which of the following tasks?
(A) Computation
(B) Communication
(C) Processing
(D) All of these
(E) None of these
13. CPU stands for :
(A) Computer Processing Unit
(B) Central Processing Unit
(C) Both (A) & (B)
(D) Communication Processing Unit
(E) None of these
14. In which type of computer, data are represented as discrete signals?
(A) Analog computer
(B) Digital computer
(C) both
(D) Digilog Computer
(E) None of these
15. Which of the following is available in the form of a PC now?
(A) Mainframe
(B) Microcomputer
(C) Minicomputer
(D) Both (B) & (C)
(E) None of these
16. PARAM is an example of :
(A) Super computer
(B) PC
(C) Laptop
(D) PDA
(E) None of these
17. Who developed the ‘analytical engine’?
(A) Jacquard loom
(B) Charles Babbage
(C) Shannon (D) IBM
(E) None of these
18. ENIAC stands for :
(A) Electrical Numerical Integrator and Calculator
(B) Electronic Numerical Integrator and Computer
(C) Electronic Numerical Integrator and Calculator
(D) Electronic Number Integrator and Calculator
(E) None of these
19. First Generation of computer was based on which technology?
(A) Transistor
(B) Vacuum Tube
(C) LSI
(D) VLSI
(E) None of these
20. Microprocessor was introduced in which generation of computer?
(A) Second Generation
(B) Fourth Generation
(C) Both (A) & (B)
(D) Third Generation
(E) All of the above
21. GUI stands for :
(A) Graphical User Interface
(B) Graph Use Interface
(C) Graphical Universal Interface
(D) None of these
22. The time taken by CPU to retrieve and interpret the instruction to be executed is called as :
(A) Instruction cycle
(B) Fetch cycle
(C) Both (A) & (B)
(D) All of these
(E) None of these
23. Which of the following is responsible for all types of calculations?
(A) ALU
(B) Control Unit
(C) Registers
(D) BUS
(E) None of these
24. Internal memory in a CPU is nothing but :
(A) A set of registers
(B) A set of ALU
(C) Microprocessor
(D) BUS
(E) None of these
25. Which of the following is permanent memory?
(A) SRAM
(B) DRAM
(C) ROM
(D) All of these
(E) None of these
Answers :
1. (A) 2. (B) 3. (B) 4. (B) 5. (B) 6. (A) 7. (A) 8. (C) 9. (A) 10. (C)
11. (B) 12. (D) 13. (B) 14. (B) 15. (B) 16. (A) 17. (B) 18. (B) 19. (B) 20. (B)
21. (A) 22. (A) 23. (A) 24. (A) 25. (C)
computer exam questions
A printer is an example of computer: B
Ο
input device.
Ο
hardware.
Ο
software.
Ο
programs.A modem is necessary if you want to: D
Ο
have voice mail added to your regular telephone service.
Ο
display digital camera photographs on your computer screen.
Ο
add a scanner to your computer system.
Ο
connect to the Internet over analog phone lines.Input, processing, output, and storage are collectively referred to as: C
Ο
communications.
Ο
the system unit.
Ο
the information processing cycle.
Ο
the systems cycle.Storage devices are included in: B
Ο
the central processing unit.
Ο
the system unit.
Ο
the microprocessor.
Ο
RAM.Of the following computer types, which one is the most powerful? A
Ο
Professional workstation
Ο
Desktop computer
Ο
Internet appliance
Ο
Network computer Checking the spelling in a word processed document is an example of which of the four computer operations?A
Ο
Processing
Ο
Output
Ο
Storage
Ο
InputWhich of the following statements is considered a disadvantage of using a computer? CStorage devices are inadequate to hold data and programs.Computers are unreliable.People generate more information from computers than they can possibly use.Computers work with text and graphics only.Which one of the following options is considered data? B
Ο
Program
Ο
Sounds
Ο
Peripheral
Ο
InformationWhich of the following is the most frequently used input device? D
Ο
Touch screen
Ο
Microphone
Ο
Scanner
Ο
Keyboard
To analyze huge amounts of scientific data and display underlying patterns, you would use a: C
Ο
minicomputer
Ο
mainframe.
Ο
supercomputer.
Ο
server The Internet is needed in all of the following instances EXCEPT: B
Ο
using the WWW to research ways to treat poison ivy.
Ο
sending an original physical copy of a letter to a customer.
Ο
conducting business with an e-tailer.
Ο
sending and receiving instant messages with your best friend.Which of the following statements regarding computer ethics is NOT true? C
Ο
Computer ethics is associated with your moral beliefs.
Ο
Computer ethics defines right and wrong principles for computer professionals.
Ο
Standards for computer ethics support copying programs and digital music.
Ο
Computer ethics is a new branch of philosophy.
CHAPTER 2
The two major components of system software are: A
Ο
the operating system and system utilities.
Ο
application software and system utilities.
Ο
primary memory and storage.
Ο
the operating system and applications software.Which of the following may be necessary for you to do after you install new application software? D
Ο
Press Shift + Alt + Del.
Ο
Turn the computer power switch off and then back on.
Ο
Do a cold boot.
Ο
Do a warm boot.The power-on self-test: B
Ο
is able to provide detailed on-screen instructions that the user finds easy to follow to correct hardware problems.
Ο
verifies that the computer hardware is working properly.
Ο
is conducted before the BIOS instructions are placed in the memory.
Ο
checks for upgrades to the application software.The options in the setup program needed for the BIOS to find the operating system are stored in: B
Ο
a driver.
Ο
CMOS.
Ο
the kernel.
Ο
the registry.Microsoft Windows stores your computer configuration information regarding installed hardware and softwarein a: D
Ο
catalog.
Ο
boot.
Ο
device driver.
Ο
registry.In order to see a custom system utility in Microsoft Windows after loading the operating system, you: A
Ο
can right-click the small icon at the right side of the taskbar.
Ο
have to load the utility from storage and then right-click on the icon at the bottom left of the screen.
Ο
can click on the utility icon and then press F8.
Ο
can click on the utility name that displays at the top of the screen.The authentication process: A
Ο
involves typing your name and your password to log into the system.
Ο
is something that is required on your home computer.
Ο
keeps track of who logs into your computer.
Ο
has to be completed before the operating system completes its loading.Which of the following is a memory management technique that makes the random access memory appear larger than it is? B
Ο
Caching
Ο
Virtual memory
Ο
Preemptive multitasking.
Ο
Read-only memoryWhich of the following displays additional options following a menu choice? A
Ο
Dialog box
Ο
Menu-driven user interface
Ο
User interface
Ο
Command-line interfaceWhat makes Windows NT different from other earlier Windows operating systems? B
Ο
It works on mobile computing devices.
Ο
It was specifically designed to work on networked computers.
Ο
It cannot prevent users from accessing confidential data.
Ο
It requires the administrator to configure each workstation individually rather than remotely.Which operating system shows the most rapid growth in the number of Intel-based computer users? C
Ο
UNIX
Ο
Microsoft Windows XP
Ο
Linux
Ο
Mac OS XWhich of the following is a disadvantage of the Linux operating system? D
Ο
It works on only a few types of computers.
Ο
Linux is powerful but very costly to purchase.
Ο
It doesn’t have a graphical-user interface.
Ο
It isn’t able to run some software products such as Microsoft Office.
CHAPTER.3
Which of the following would NOT be performed with application software? C
Ο
Charts for a sales meeting presentation
Ο
Customer list used for mailing invoices
Ο
Hard disk cleanup
Ο
Financial report sent to investorsWhat kind of program would you choose to use to create computer files that you share with other people in your company? D
Ο
Vertical
Ο
Videoconferencing
Ο
Utility
Ο
ProductivityWhich of the following is an advantage of a software suite? A
Ο
The individual applications share the same resources
Ο
The suite includes the operating system
မိမိအမွားကို တစ္ဘ၀လံုးယူမသြာပါနဲ့
ဒီစကားဟာ..သိပ္တန္ဖိုး၇ွိျပီးလိုက္နာသင့္ပါတယ္.....တခ်ိုုလူေတြကကိုယ္မွာေနတာကိုလည္သိတယ္....
ျပင္ဘို ့ၾကေတာ ့..ဂုဏ္ေတြ..မာနေတြ...နာၾကည္မုန္တီးတာေတြနဲ.....ဖံုးကြယ္ထားတယ္..........
အမွာကိုသိျပီးအမွန္မျပင္ပဲ.....တဘ၀လံုးယူေဆာင္သြား၇င္ေတာ့...မိမိအတြက္လည္းမေကာင္းဘူး
မိသာစုအတြက္လည္းမေကာင္းဘူး.....သူငယ္ခ်င္း၁ေယာက္ကေျပာတယ္.....သူအမွာက ျပင္လိုမ၇ဘူးတဲ.....
ျပင္လို့မ၇ေတာ ့တဲ....အမွာေတြလဲ၇ွိပါတယ္....ျပင္လို ့မ၇၇င္ ေကာင္ေအာင္ေနပါ....ထပ္မမွားပါနဲ........
ျပင္လို ့မ၇ေတာ ့လို ့ထပ္မွားေနတဲလူတေယာက္အေၾကာင္း ေျပာျပမယ္ေလ..
ကိုယ္ေတြ ့ဇာတ္လမ္းေလးပါ.............................
သိပ္ခ်စ္ၾကတဲခ်စ္သူ၂ဦးျဖစ္တယ္.......ခ်စ္သက္တမ္းကလည္း...၄ႏွစ္ေက်ာ္ခဲဲ ့ျပီး....မိဘခ်င္ကလည္းအဆင္ေျပၾကတယ္......
သူတို၂ေယာက္လက္ထပ္ဘို ၇က္ကလည္း၁လေက်ာ္ေက်ာ္...ေလာက္ဘဲလိုေတာတယ္.......ဒီအခ်ိန္မွာပဲ..ေယာက္က်ာေလးဘက္ကေဆြမ်ိုး၁ေယာက္ဆံုးသြာတယ္ေလ..
နာေ၇းျဖစ္ေနလို ့ ေကာင္ေလးကမျဖစ္မေနသူအမ်ိုးေတြ၇ွိတဲနယ္ကိုသြား၇တယ္....၈၇က္ေလာက္ၾကာသြားတယ္...ဲပန္ေ၇ာက္လာေတာ ့...
ေကာင္ေလးကို ေကာင္မေလကအေတြမခံတဲ....အျပင္လက္ထက္ဘို ့ကိုဖ်က္သိမ္းသြာတယ္......ေကင္ေလးကမေတြ ့ေတြ ့ေအာင္လုပ္ျပီး...
ေမးတယ္.....ဘာေၾကာင္လဲ.........ေကာင္မေလကေျပာတယ္...ခ်စ္လို ့တဲ့.....ဘာပဲေမးေမးဒါပဲေျပာေနတယ္......ေနာက္ေတာ ့ေကာင္ေလး
အမွန္ေတြကိုသိ၇ျပီး....ေကာင္ေလးမ၇ွိတဲအခိ်န္မွာေကာင္မေလးက ေမြေနပြဲ၁ခုကိုသြားခဲတယ္......တဖတ္သက္ၾကိ ုက္ေနတဲသူကေမြးေနပြဲကို...
အေၾကာင္ျပုျပီးေကာင္မေလးကိုအ၇ယူလိုက္တယ္......ေကာင္ေလးကသိသိခ်င္ပဲ....ေကာင္မေလကိုခြင္လွ ြက္ေၾကာင္းေျပာတယ္.........
ေကာင္မေလးက လက္မထပ္နုိင္ေတာ ့တဲအေၾကာင္းနဲ ေမြေနပြဲကေကာင္ေလးကိုပဲလက္ထပ္ေတာမယ္....၇က္လည္းသူကိယ္တိုင္ေ၇ြးျပီျပီးတဲ......................
ဒီလုိနဲလက္ထက္ဘို ့........၁၇က္အလိုမွာေကာင္မေလးက...ေကာင္ေလးကိုအဆက္အသြယ္လုပ္ျပီး.....၁ခုေတာင္ဆိုတယ္........
ဘု၇ာလိုက္ပုိ ့ေပးပါတဲ ့....ေနာက္ဆံုးအေနနဲ ့ေပါ ့......ေကာင္ေလးမျငင္း၇က္ခဲဘူး....အဲဒီညကေကာင္မေလးကသူကိုအပိုင္ၾကံတဲ ့သူ.........
တသက္လံုးနာက်ည္းေစ၇မယ္တဲ.......၇ုပ္၇ွင္ၾကည္ၾကတယ္.....အိမ္ေ၇ာက္ေတာ ့၁၁နာ၇ီထိုးျပီး......ေကာင္မေလးမင္ဂလာေဆာင္းျပီေနာက္ေန ့
သူေယာက္က်ား.......ေကာင္ေလးအိမ္ေ၇ာက္လာျပီးေမတယ္...အကိုတိုမေနက ေအးခ်မ္းတဲေန၇ာသြာတယ္ဆီူတဲ.....မင္းကိုဘယ္သူေျပာလဲလို ့....
ေကာင္ေလးကေမးတယ္........ေကာင္မေလးကေျပာတယ္လို ့.....သူကေျပာတယ္....ဟုတ္တယ္...ဒါေပမယ္မင္းထင္သလိုမဟုတ္ဘူး..........
ဘု၇ားသြားတာလို...ေကာင္ေလကေျပာတယ္......အဲဒီအခ်ိန္တဲက အိမ္ေထာင္ေ၇း အဆင္မေျပတာ ခုခေလး၁ေယာက္၇တဲအထိပါပဲ..........
ကသိကေအာက္
သိနားလည္တာထက္ ဘာမွမသိတာမ်ိဳးက
ပိုေကာင္းတတ္ပါတယ္။ အဲ...
မသိခ်င္ေယာင္ ေဆာင္ေနရတာမ်ိဳးကေတာ့
နည္းနည္းကသိကေအာက္ ႏုိင္တာေပါ့ဗ်ာ။
ေမာင္ခ်မ္းသာ(ဆိုက္ကား)ႏွင့္ မႏွင္းပုလဲ (ပဲျပဳတ္)တို႔၏ မဂၤလာေဆာင္
ယေန႔သည္ ဆိုက္ကားသမားေလး ေမာင္ခ်မ္းသာႏွင့္ မႏွင္းပုလဲတို႔၏ လက္ထပ္ မဂၤလာပြဲ ျဖစ္ပါသည္။ အလယ္ထိုင္ နာယကႀကီးက ေ႐ွ႔ဖတ္စာေရး ကမ္းေပးေသာ ေ႐ႊေရာင္ျဖင့္ ႐ိုက္ထားသည့္ လက္ထပ္စာခ်ဳပ္ ကပ္ထူ႐ြက္ ႏွစ္႐ြက္ကို အေသအခ်ာ စစ္ေဆးၾကည့္ေန၏။ 'အဘ ဦးသူေတာ္၏သား ေမာင္ခ်မ္းသာ အသက္ ၂၆ ႏွစ္၊ ဟုတ္သလား' နာယကႀကီးက စာခ်ဳပ္တြင္ပါသည္မ်ားကို ဖတ္၍ လွမ္းေမးလိုက္ရာ ေမာင္ခ်မ္းသာက မ၀ံ့မရဲ ေခါင္းညိတ္ျပသည္။ 'အလုပ္က ဆိုက္ကား နင္းတယ္ေနာ္' ေမာင္ခ်မ္းသာ ေခါင္းညိတ္ရျပန္သည္။ 'အဘ ဦးကြန္ပါ၏ သမီး မႏွင္းပုလဲ၊ အသက္ ၂၂ ႏွစ္၊ အလုပ္အကိုင္ ပဲျပဳတ္ေစ်းသည္၊ ဟုတ္တယ္ေနာ္' မႏွင္းပုလဲက ဘာျပန္ေျပာရမွန္းမသိသျဖင့္ ေမာင္ခ်မ္းသာကို လွမ္းၾကည့္၏။ ေမာင္ခ်မ္းသာက လက္တို႔၍ ေခါင္းညိတ္ျပသည္။ မႏွင္းပုလဲက တရားသူႀကီးဘက္လွည့္ၿပီး ကမန္းကတန္း ေခါင္းညိတ္ျပလိုက္၏။'အခု မင္းတို႔ႏွစ္ဦး သေဘာတူ လက္ထပ္ၾကမယ္ ဟုတ္ၿပီလား' ႏွစ္ေယာက္လံုးက 'ဟုတ္ကဲ့' ဟု သံၿပိဳင္ ေျဖလိုက္ၾကသည္။ 'မႏွင္းပုလဲက အခု လက္ထပ္တာ ဘယ္သူ႔ရဲ႔ ေသြးေဆာင္ ျဖားေယာင္းၿခိမ္းေျခာက္ျခင္းမွ မ႐ွိဘဲ မိမိရဲ႔ ကင္းလြတ္တဲ့ ကိုယ္ပိုင္ဆႏၵနဲ႔ သေဘာတူတာလား၊ ဒါမွမဟုတ္ တစံုတေယာက္ရဲ႔ ၿခိမ္းေျခာက္မႈ၊ ေသြးေဆာင္မႈ၊ ျဖားေယာင္းမႈေၾကာင့္ လက္ထပ္ရတာလား ဆိုတာကို ေျဖပါ' မႏွင္းပုလဲက ဘာမွမေျဖဘဲ ေမာင္ခ်မ္းသာ ဘက္သို႔သာ လွည့္ၿပီး ေငးၾကည့္ေနသည္။
ေမာင္ခ်မ္းသာက ပခံုးခ်င္းတိုက္၍ မ်က္ရိပ္ျပလိုက္၏။ 'ကၽြန္မ ႀကိဳက္လို႔ ယူတာ႐ွင့္' ေနာက္က ဆိုက္ကားအဖြဲ႔က '၀ါး' ခနဲ ရယ္လိုက္သျဖင့္ နာယကႀကီးက ခပ္တည္တည္ လွမ္းၾကည့္ လိုက္ေသာအခါ မ်က္ႏွာပိုးသတ္၍ ၿငိမ္သြားၾကသည္။ ဤလက္ထပ္ပြဲကို ကမကထ ျပဳလုပ္ေပးခဲ့ေသာ ေ႐ွ႔ဖတ္စာေရးမွာ ရယ္ခ်င္ေနေသာ မ်က္ႏွာထားကို ေခါင္းငံု႔၍ ဟန္ေဆာင္ထားရသည္။ 'ကဲ.. ကဲ.. ဟုတ္ပါၿပီ၊ ဟုတ္ပါၿပီ၊ လာ လာ ဒီမွာ လက္မွတ္ထိုးၾက' လက္မွတ္ထိုးရမည့္ ေနရာကို ေ႐ွ႔ဖတ္စာေရးက ေထာက္ျပသည္။ ေမာင္ခ်မ္းသာက အလ်င္ လက္မွတ္ထိုး၏။ ဒုတိယ မႏွင္းပုလဲက တုန္တုန္ယင္ယင္ႏွင့္ လက္မွတ္ထိုးရာ တလံုး တလံုးကို အေတာ္ၾကာၾကာ ေရးေနရ၏။တရားသူႀကီးမ်ားက စိတ္႐ွည္စြာ ေေစာင့္ၾကည့္ေနၾက၏။ 'သက္ေသႏွစ္ေယာက္ လာ လက္မွတ္ထိုးပါ' ဟု ေ႐ွ႔ဖတ္စာေရးက ေခၚလိုက္ရာ၊ ေအာင္ဗလႏွင့္ လွၾကည္တို႔ ႏွစ္ေယာက္ အလုအယက္ ထြက္လာၾကၿပီး သူအလ်င္ ကိုယ္အလ်င္ လုပ္ေနၾကေသးသည္။ ေနာက္မွ လွၾကည္က အလ်င္ လက္မွတ္ထိုးျဖစ္သည္။xxxxx xxxxx xxxxxလက္မွတ္ထိုးျခင္းကိစၥ ၿပီးစီးၾကသျဖင့္ သတို႔သားႏွင့္ သတို႔သမီး တြဲ၍ ဆိုက္ကားအဖြဲ႔ ျခံရံၿပီး ႐ံုးတြင္းမွ ထြက္လာၾက၏။ ေအာင္ဗလက သေျပပန္းေတြ ေ၀ေ၀ဆာဆာ လက္ကိုင္ထိပ္၌ ထိုးစိုက္ထားေသာ ဆိုက္ကားကို အလ်င္ဆံုးထုတ္၍ လမ္းေပၚတြန္းတင္လိုက္သည္။ ထိုဆိုက္ကားသည္ သတို႔သား ေမာင္ခ်မ္းသာပိုင္ ဆိုက္ကားျဖစ္သည္။ ေအာင္ဗလက ေန႔စဥ္ သူနင္းေနက် ဆိုက္ကားကို ယေန႔အဖို႔ ဆိုက္ကားပိုင္႐ွင္အိမ္က ထုတ္ယူမလာေပ။ ေမာင္ခ်မ္းသာ၏ ဆိုက္ကားကို ယူကာ နင္းေပးရမည္ ျဖစ္၍ ျဖစ္၏။ ေအာင္ဗလနင္းေသာ ဆိုက္ကားေပၚသို႔ ေမာင္ခ်မ္းသာႏွင့္ မႏွင္းပုလဲတို႔ တက္ၾကသည္။
ေမာင္ခ်မ္းသာ က ေ႐ွ႔ထိုင္ခံုမွာ ေနရာယူ၍ မႏွင္းပုလဲက ေနာက္ဘက္ခံုတြင္ ယို႔ယို႔ကေလး ထိုင္လိုက္၏။ သူတို႔ေနာက္မွ ဆိုက္ကား ဆယ့္ႏွစ္စီးက တန္းစီ၍ ေနရာယူလိုက္ၾကသည္။ တရား႐ံုး႐ွိ လူအားလံုးတို႔သည္ ထူးဆန္းေသာ မဂၤလာပြဲႀကီးကို ၿပံဳးကာ ၿပံဳး၊ ရယ္ကာရယ္ျဖင့္ ၾကည္ႏူးစြာ လွမ္းၾကည့္ၾကေလ၏။
ဆိုက္ကား စထြက္ေတာ့ ေအာင္ဗလက သူ၏ ညာဘက္လက္ကိုင္တြင္ တပ္ဆင္ထားေသာ ေခါင္းေလာင္းကို အဆက္မျပတ္တီးရင္း နင္းလာသည္။ 'ေဟ့ေကာင္ေအာင္ဗလ၊ ဘာလုပ္တာလဲကြ၊ လူေတြ ၾကည့္ေနၾကၿပီ၊ ႐ွက္စရာႀကီး' 'ေဟ့ေကာင္ ခ်မ္းသာ၊ ၿငိမ္ၿငိမ္လိုက္လာစမ္း၊ တ႐ုတ္မဂၤလာေဆာင္ဆိုရင္ ကားဟြန္းသံေတြ တညံညံနဲ႔ ဒီေလာက္တီးလာတာပဲကြာ' 'သူတို႔က ကားကြ' 'တို႔လည္း တို႔အထြာနဲ႔ တို႔ေပါ့ကြ၊ ဘီးပါတာပဲ၊ သူတို႔က ေမာ္ေတာ္ကား၊ တို႔က ဆိုက္ကား... ဟား... ဟား... ဟား...' 'ငါ မ်က္ႏွာ ပူတယ္ကြ' 'မ်က္ႏွာပူရင္ မင္းနား႐ြက္ကားသားပဲ၊ နား႐ြက္ ႏွစ္ဖက္နဲ႔ ကာထားေပါ့ကြ' 'အစ္ကို... လုပ္ပါဦး၊ အစ္ကို႔ လူေတြက ေအာ္ႀကီးဟစ္က်ယ္နဲ႔၊ ႐ွက္စရာႀကီး' မႏွင္းပုလဲက ေနာက္မွ လွမ္းေျပာသည္ကို ေနာက္ဆိုက္ကားနင္းလာသူ ၾကည္ျမင့္က ၾကားသြားဟန္တူသည္။ 'တို႔ကေတာ့ ေအာ္ႀကီးဟစ္က်ယ္ပဲေဟ့၊ လမ္းေထာင့္က ဆိုက္ကားဂိတ္ဆိုေတာ့ ဆူဆူညံညံ ကားသံ၊ လူသံေတြ ၾကားထဲမွာ ေျပာရ ဆိုရမို႔ ေအာ္ေျပာရတာ အက်င့္ျဖစ္ေနၿပီ၊ ႐ွက္ရင္ ေခါင္းငုံ႔ၿပီး လိုက္လာ၊ ေရာက္ေတာ့မယ္' 'ဒီကလဲ ခုနစ္အိမ္ၾကား ႐ွစ္အိမ္ၾကား ေအာ္ၿပီး ေစ်းလိုက္ေရာင္းရတဲ့ ပဲျပဳတ္သည္ပါပဲ ေတာ္၊ အခုဟာက လြန္လြန္းလို႔' မႏွင္းပုလဲဆီက အသံထြက္လာျခင္းမဟုတ္ပါ။
စိတ္ထဲက ရန္ေတြ႔ လိုက္ျခင္း ျဖစ္သည္။ ေနာက္ဘက္မွ ဆိုက္ကားမ်ားသည္လည္း ဟြန္းႏွိပ္သူႏွိပ္၊ ေခါင္းေလာင္းတီးသူတီးျဖင့္ တသီတတန္းႀကီး ဆူညံစြာ ထြက္လာၾကေလသည္။ လမ္းတေလွ်ာက္ လူမ်ား ထြက္ၾကည့္ေနၾကသျဖင့္ ေမာင္ခ်မ္းသာႏွင့္ မႏွင္းပုလဲမွာ ႐ွက္လြန္း၍ ေခါင္းငံု႔ၿပီးသာ လိုက္လာၾကရေလသည္။
xxxxx xxxxx xxxxx
အိမ္ကေလးေပၚသို႔ စုျပံဳ တက္လာၾကေသာ အဖြဲ႔ႀကီးကို ၾကည့္၍ မႏွင္းပုလဲ၏အေမ ေဒၚေအးမမွာလည္း အလိုလိုု ႐ြ႔ံသလိုလို ျဖစ္ၿပီး ေခါင္းရင္းဘက္ ဘုရားစင္႐ွိရာ ေအာက္ဘက္သို႔ ယို႔ယို႔ကေလး သြားထိုင္ေနေလသည္။ လူဆယ့္ငါးေယာက္၏ အေလးခ်ိန္ ဒဏ္ေၾကာင့္ အိမ္ကေလးမွာ ယိမ္းထိုး လႈပ္ခါေနသည္။ 'ဟဲ့.... ဟဲ့.... အိ္မ္ၿပိဳပါ့မယ္' အိမ္မွာ ထိုင္ေစာင့္ေနၾကေသာ မႏွင္းပုလဲ၏ မိတ္ေဆြ အမ်ိဳးသမီး အုပ္စုထဲမွ တေယာက္က ေအာ္လိုက္သည္။ 'ကဲ... ကဲ... အခန္းအပ္ၿပီး မဂၤလာၾသဘာစကား ေျပာရမယ္' ေအာင္ဗလက အခန္း၀မွေန၍ သံေနသံထားျဖင့္ ဟန္ပန္ထုတ္၍ မိန္႔ခြန္းေႁခြရန္ ျပင္လိုက္သည္။ 'ေဟ့... ေအာင္ဗလ မင္းက ႀကီးႀကီးက်ယ္က်ယ္ ဘာတတ္လို႔ ေျပာမွာလဲ၊ မလိုပါဘူးကြ၊ သူတို႔ႏွစ္ေယာက္ထားခဲ့၊ တို႔က မရီဆိုင္ ေျပးၿပီး မဂၤလာေအာင္ပြဲေလး က်င္းပမယ္၊ ဒါပဲ' လွေအာင္က ကျပင္တြင္ ထိုင္ေနလ်က္က လွမ္းကန္႔ကြက္ေန၏။
'ေနပါဦးကြ၊ ငါ့ ဆိုက္ကား႐ွင္သမီး သမၼတမွာ လက္ထပ္တုန္းက ၾသဘာမဂၤလာစကားေျပာတာ ၾကားဖူးလို႔ပါ့၊ ငါေျပာတတ္ပါတယ္ကြ' 'ကဲ... ဒါဆို ေျပာကြာ ျမန္ျမန္၊ ငါ ေလပ်ိဳ႔လာၿပီ' ကိုခ်စ္တီးက ေနာက္က်ေနသျဖင့္ ေလွကားအ၀တြင္ တစ္ဆို႔ႀကီး ရပ္ေနလ်က္က လွမ္းေျပာလိုက္၏။ 'ဒီလိုပါ ခင္ဗ်၊ အခု မဂၤလာလက္ထပ္ပြဲကေတာ့ ဆိုက္ကားပိုင္႐ွင္ ေမာ္ခ်မ္းသာႏွင့္ ပဲျပဳတ္ပိုင္႐ွင္ မႏွင္းပုလဲတို႔ရဲ႔...' 'ပဲျပဳတ္ေတာင္း ပိုင္တယ္ေျပာပါကြ' 'ဟုတ္ကဲ့၊ ပဲျပဳတ္ေတာင္းပိုင္႐ွင္ မႏွင္းပုလဲတို႔ရဲ႔ မဂၤလာလက္ထပ္ပြဲ ျဖစ္ပါတယ္' 'ေတာ္ၿပီေဟ့ သြားမယ္၊ ခ်မ္းသာ ေပးထားတဲ့ ခဲဖိုးပိုက္ဆံ ဘယ္သူ႔ဆီမွာလဲ ေဟ့' 'က်ဳပ္ဆီမွာပါဗ်' လွေအာင္က ေျပာရင္း အက်ႌအိတ္ကို ပုတ္ျပလိုက္သည္။ ဆိုက္ကား အဖြဲ႔ႀကီးက ဘဲလ္သံ ဆူညံစြာျဖင့္ ထြက္ခြါသြားၾကေလသည္။ ေမာင္ခ်မ္းသာတို႔ ႏွစ္ေယာက္ အခန္း၀တြင္ ေမာေမာပန္းပန္း ထိုင္ခ်လိုက္ၾကေတာ့သည္။ 'အဲဒီလူေတြ ႐ုတ္႐ုတ္ လုပ္တာနဲ႔ ႀကိဳးလည္း မတားလိုက္ရပါဘူးေနာ္' ဟု ေဒၚျမျမ ေခါင္းေဆာင္ေသာ အမ်ိဳးသမီးတစု ရယ္ရယ္ေမာေမာျဖင့္ ထြက္သြားၾကေလသည္။
xxxxx xxxxx xxxxx
ေဒၚေအးမကလည္း အလိုက္သိစြာ ေဘးအဖီ မီးဖိုဘက္သို႔ ထြက္သြားသည္။ မႏွင္းပုလဲသည္ အခန္းတြင္းသို႔ မရဲတရဲ လွမ္းၾကည့္လိုက္၏။ ၿပီးေတာ့ ႐ွက္စႏိုးျဖင့္ ေခါင္းငံု႔ေနသည္။ ဤအခန္းသည္ မေန႔ကအထိ သူ႔အေမႏွင့္ သူ အိပ္ေနက် အခန္းျဖစ္၏။ ယခုေတာ့ ဤအခန္းပင္ သူ႔အတြက္ မဂၤလာအခန္း ျဖစ္ေန၏။ အေမ့အိပ္ရာ ဖ်ာလိပ္က အိမ္ေ႐ွ႔ခန္း ေခါင္းရင္းဘက္တြင္ လိပ္လ်က္သား ေတြ႔ရ၏။ အခန္းတြင္းမွာေတာ့ နံနက္က မိမိကိုယ္တိုင္ အိမ္ေဘးက မျမနဲ႔အတူ ျပင္ဆင္ထားေသာ အိပ္ရာ အသစ္စက္စက္ကို ေတြ႔ရ၏။ ႏွစ္ေယာက္အိပ္ဖ်ာေခ်ာ အသစ္စက္စက္ေပၚတြင္ ေ႐ႊဘံုသာလမ္းက ဆိုက္ကားအုပ္စုက လက္ဖြဲ႔အျဖစ္၀ယ္ပို႔ထားေသာ ေခါင္းအံုးအသစ္စက္စက္ႏွစ္လံုးႏွင့္ ေျခရင္းတြင္ အညာေစာင္ အသစ္စက္စက္က ေခါက္လ်က္ ပံုခ်ထားသည္။ စိန္ဂၽြန္းေစ်းက အေမ သြား၀ယ္ေပးထားေသာ ႏွစ္ေယာက္အိပ္ ႏိုင္လြန္ျခင္ေထာင္ ပန္းေရာင္က အေပၚကမိုးလ်က္...။ နံရံေဘးတြင္ မေန႔က ကိုခ်မ္းသာ လာပို႔ထားေသာ ေဆးျပယ္စ ျပဳၿပီျဖစ္သည့္ အနက္ေရာင္ သံေသတၱာ အေဟာင္းတခုကလည္း အခန္းအတြင္း ပစၥည္းအသစ္ ျဖစ္သည္။ မိမိ အ၀တ္မ်ားထည့္သည့္ ထန္းေခါက္ဖာက ေျခရင္းေထာင့္တြင္ ယခင္ေနရာအတိုင္း ျဖစ္၏။ အေမ့သံေသတၱာကလည္း ယခင္ေနရာေဟာင္းမွာ....။
ေမာင္ခ်မ္းသာက ၿပံဳးၿပံဳးႀကီး မႏွင္းပုလဲကို ၾကည့္ေန၏။ 'ဘာၾကည့္တာလဲ' မႏွင္းပုလဲက မ်က္ေစာင္းထိုး၍ ေမ့ေမ့ေလ်ာ့ေလ်ာ့ ႏႈတ္ခမ္းစူထားရမည့္အစား ၿပံဳးလိုက္မိ၏။ 'အဟင္း... ဟင္း.. ဘာလုပ္ရမွန္းမသိလို႔' 'ခစ္..ခစ္...ခစ္...' မႏွင္းပုလဲက ပါးစပ္ကို လက္ႏွင့္အုပ္ၿပီး ႐ုတ္တရက္ အဆက္မျပတ္ ရယ္ခ်လိုက္၏။ 'ဘာရယ္တာလဲ ဟ' ေမာင္ခ်မ္းသာက မလံုမလဲ ၿပံဳးျဖဲျဖဲႏွင့္ လွမ္းေမးသည္။ 'ဘာမွမဟုတ္ပါဘူး၊ တျခားပါ' ခုမွ တကယ္ ရယ္စရာ ေတြ႔လိုက္ရ၍ မႏွင္းပုလဲ ရယ္လိုက္ျခင္း ျဖစ္သည္။ ယခင္က အမွတ္တမဲ့ ျဖစ္ခဲ့ၿပီး ယခု လမ္းမွာ ကိုေအာင္ဗလ ေျပာမွ သတိထားၾကည့္လိုက္မိသည္။ ကိုခ်မ္းသာ နား႐ြက္ႀကီးက တကယ္ ရယ္စရာ ေကာင္းေအာင္ ကားကားႀကီး ေတြ႔ေနရ၏။ သို႔ေသာ္ လူႀကီးသူမမ်ားက ေျပာဖူးသည္။ နား႐ြက္ေကာင္းရင္ ဥာဏ္ေကာင္းသည္ကို...။ 'ဟုတ္မွာပါပဲ၊ ဒါေၾကာင့္ အစ္ကိုက ကိုယ္ပိုင္ ဆိုက္ကားနဲ႔ ဘာနဲ႔ ျဖစ္ေနတာ' မႏွင္းပုလဲ မ်က္ႏွာပိုး ျပန္သတ္သြားသည္။
xxxxx xxxxx xxxxx
'ႏွင္းပုလဲဆိုတဲ့ နာမည္က ဆန္းတယ္ဟ၊ နင္နဲ႔လိုက္တယ္၊ နင့္ကို ဘာေၾကာင့္ ဒီနာမည္ မွည့္ေပးတာလဲ... ဟင္' 'အို အကိုကလဲ၊ ကၽြန္မကို ႏွင္းပုလဲမွာ ေမြးတာေတာ့၊ ဒါေၾကာင့္ အေဖက လြယ္လြယ္ပဲ ႏွင္းပုလဲလို႔ ေပးလိုက္တာ' 'ဟာ... စိတ္ကူးပ်က္လိုက္တာဟာ၊ ငါက ပုလဲေလးလို နင္က ျဖဴလို႔ ေပးတာလားလို႔ သေဘာက်ေနတာ' 'ကၽြန္မက ျဖဴမွ မျဖဴတာ၊ အစ္ကို ျမင္တဲ့ အတိုင္းပဲဟာ' 'ငါ့မ်က္စိထဲကေတာ့ ျဖဴေနတာပဲဟာ' 'ပို မေနစမ္းပါနဲ႔' 'မပိုပါဘူးဟ၊ ေဟာဒီမွာ' 'အို.... ၾကည့္စမ္း.... ခစ္..ခစ္..' အိမ္ေ႐ွ႔ခန္းက အေမ ေဒၚေအးမက ေခ်ာင္းတခ်က္ ဆိုးလိုက္၏။ ဤေတာ့မွ အခန္းထဲမွ မႏွင္းပုလဲတို႔၏ အသံ တိတ္သြားေလသည္။
xxxxx xxxxx xxxxx
ျခေသၤ့မင္း လက္ဖက္ရည္ဆိုင္တြင္ မႏွင္းပုလဲအတြက္ နံျပားေစာင့္ရင္း ေမာင္ခ်မ္းသာႏွင့္ မႏွင္းပုလဲတို႔ လက္ဖက္ရည္ ထိုင္ေသာက္ေနၾက၏။ ဆိုက္ကားေ႐ွ႔ခံုေပၚတြင္ေတာ့ မႏွင္းပုလဲ၏ ပဲျပဳတ္ေတာင္းကား အေငြ႔တေထာင္းေထာင္းႏွင့္....။ ေမာင္ခ်မ္းသာသည္ ဤ လက္ဖက္ရည္ဆိုင္ကေလးက စ၍ မိမိႏွင့္ မႏွင္းပုလဲတို႔ ေရစက္ဆံုစည္းမိ ၾကသည္ကို ျပန္လည္ေတြးေနမိ၏။ ေမာင္ခ်မ္းသာသည္ တေကာင္ႂကြက္၊ ေဆြမ႐ွိမ်ိဳးမ႐ွိ။ ရန္ကုန္တြင္ ၿမိဳ႔သစ္ေလး၌ ဆိုက္ကားနင္းစားသူ ျဖစ္သည္။ မိမိ၏ ႀကိဳးစားမႈ၊ ေခၽြတာမႈ၊ လိမၼာမႈေၾကာင့္ သူတပါးဆိုက္ကားကို ေန႔ေပးအငွား နင္းလာခဲ့ရာမွ ဆိုက္ကားတစီး ကိုယ္ပိုင္ျဖစ္လာသူ ျဖစ္၏။ မိမိႏွင့္ ဘ၀တူ ဆိုက္ကားဆရာ ကိုခ်စ္တီးအိမ္တြင္ တလ ေလးဆယ္ေပးၿပီး ေနခဲ့သူ ျဖစ္၏။ မနက္ေစာေစာ ဆိုက္ကားနင္းထြက္လာၿပီး ဤလက္ဖက္ရည္ဆိုင္တြင္ လက္ဖက္ရည္တခြက္ မွန္မွန္ ေသာက္ေနက် ျဖစ္၏။ မႏွင္းပုလဲကလည္း အျခား ပဲျပဳတ္သည္မ်ားႏွင့္ အတူတူ ဤလက္ဖက္ရည္ဆိုင္၌ နံျပား၀ယ္ေနက် ျဖစ္၏။
ေမာင္ခ်မ္းသာက မႏွင္းပုလဲကို နံနက္တိုင္း ေတြ႔ေန ျမင္ေနရာမွ မ်က္စိက်လာသလို မႏွင္းပုလဲကလည္း ေမာင္ခ်မ္းသာအေပၚ စိတ္ယိုင္လာခဲ့ျခင္း ျဖစ္၏။ ငယ္ငယ္႐ြယ္႐ြယ္ သူမ်ားတကာလို ေန႔စားအငွားနင္းတာ မဟုတ္ဘဲ ကိုယ္ပိုင္ဆိုက္ကားႏွင့္ တကိုယ္ေရ တကာယ ေနသူျဖစ္မွန္း တခြန္းစ ႏွစ္ခြန္းစ ေမးရင္း သိလာရေတာ့ အားကိုးလိုစိတ္ကေလးက ၀င္လာမိ၏။ ေနာက္ေတာ့ သူတို႔ခ်င္း သေဘာမွ်လာၾကသည္။ အစ ပထမတြင္ ေမာင္ခ်မ္းသာေနာက္ပိုးပံုကေလးက ရယ္စရာေကာင္း၏။ 'ညီမ ပဲျပဳတ္ကေလး ဆီဆမ္းၿပီး နံျပားကေလးနဲ႔ စားခ်င္တယ္ဗ်ာ။ ပဲျပဳတ္နာမည္က ဘယ္လိုတဲ့တုံး' 'ပဲျပဳတ္ပဲ နာမည္႐ွိမလားေတာ့' 'အို... အို... ေယာင္လို႔၊ လူနာမည္ ေမးတာပါ' မႏွင္းပုလဲက လက္ဖက္ရည္ၾကမ္းေသာက္ရင္း ရယ္မိသျဖင့္ သီးသြားသည္။ ယခုေတာ့ တူႏွစ္ကိုယ္ တစားပြဲတည္း ထိုင္၍ လက္ဖက္ရည္ ေသာက္ေနရၿပီ ျဖစ္၏။
xxxxx xxxxx xxxxx
'ေဟာဒီ လမ္းထိပ္ ခ်ေပးရင္ ေတာ္ၿပီအကို' ႏွင္းပုလဲက သူေရာင္းေနက် ႏွစ္ ရပ္ကြက္ လမ္းထိပ္သို႔ ေရာက္ေသာအခါ ေမာင္ခ်မ္းသာကို ဆိုက္ကားရပ္ခိုင္းသည္။ ဆိုက္ကားေပၚမွ လွမ္းဆင္းလိုက္ၿပီး ေပါင္ေပၚ တင္ထားေသာ ပဲျပဳတ္ေတာင္းကို ေခါင္းေပၚ ေခါင္းအခုယူ၍ ႐ြက္လိုက္သည္။ 'အကို သြားေတာ့ေလ' 'ေနပါဦးဟ၊ နင္ေအာ္တဲ့ အသံေလးၾကားခ်င္လို႔၊ ၿပီးေတာ့ ဘယ္အခ်ိန္ ဒီေနရာက လာႀကိဳရမလဲ ဆိုတာ ေမးမလို႔' 'အို... အကိုကလဲ ကၽြန္မဘာသာ ျပန္ပါ့မယ္၊
ကိုယ့္အလုပ္ကိုယ္ လုပ္စမ္းပါ၊ အလကား အေမာခံၿပီး လာႀကိဳ လာပို႔ လုပ္ေနရဦးမယ္၊ အကို အဲဒီအခ်ိန္ လူရေနေတာ့ ဘယ့္ႏွယ္လုပ္မလဲ' 'သူမ်ား လႊဲေပးလိုက္မွာေပါ့ဟ၊ ေျပာစမ္းပါ၊ ဘယ္အခ်ိန္ ျပန္လာေစာင့္ရမလဲ' 'ကဲ... ကဲ... ကိုယ္ေတာ္ရယ္၊ အကိုေတာ့ ပိုက္ဆံမရဘဲ ေမာေနရမွာ စိုးလို႔ ေျပာတာ၊ ခါတိုင္း တနာရီ ေက်ာ္ေက်ာ္ေလာက္ လွည့္လိုက္ရင္ ကုန္တတ္တာပဲ' 'ဒီလိုဆို ငါလာေခၚမယ္၊ လုပ္ပါဟ၊ ငါၾကားေအာင္ ေအာ္လိုက္စမ္းပါဦး' 'ပိုလိုက္တာေနာ္' ႏွင္းပုလဲက မ်က္ေစာင္းေလး ၿပံဳး၍ ထိုးရင္း လမ္းက်ဥ္းဘက္သို႔ လွည့္ထြက္သြား၏။ 'ပဲျပဳတ္... နံျပား...' ေမာင္ခ်မ္းသာအဖို႔ကား ႏွင္းပုလဲ၏ ေအာ္သံသည္ ေမဆြိသီခ်င္းသံထက္ မ်ားစြာေကာင္းကာ နား၀င္ခ်ိဳ သာယာလွပါသည္။ ေက်နပ္စြာၿပံဳး၍ ဆိုက္ကားကို မတ္တတ္ အ႐ွိန္ယူကာ နင္းခ်လိုက္ၿပီးလွ်င္- 'ေမာေတာ့ ေမာတာေပါ့၊ ဒါေပမယ့္ မေမာဘူး' ဟု သီခ်င္းကို ညည္းကာ ထြက္သြားေလသည္။ မႏွင္းပုလဲသည္ ေနာက္သို႔ လည္ျပန္ၾကည့္လိုက္ရာ ဆိုက္ကားဘီး ခ်ိဳင့္ထဲက်သြားသံကို ၾကားရၿပီး ျမဴႏွင္းမ်ား အၾကားတြင္ မႈန္၍ ေပ်ာက္ကြယ္သြားေသာ လင္ေတာ္ေမာင္အား သူရဲေကာင္းႀကီး စစ္ေျမျပင္သို႔ ထြက္သြားသည္ကို မ်က္စိတဆံုး လွမ္းေမွ်ာ္၍ ၾကည့္ေနမိေသာ ဇနီးသည္ကဲ့သို႔ ေက်နပ္ပီတိ ျဖစ္ေနမိေတာ့၏။
'ပဲျပဳတ္... နံျပား....' ေမာင္ကိုယု [ျမတ္ေလးမဂၢဇင္း၊ ေမ ၁၉၈၆]
ေနေသာ္ခ တကယ္ ့အခ်စ္စစ္နဲ ့သာခ်စ္တယ္ဆိုရင္ ........တစ္ႀကိမ္တစ္ခါေလာက္ ခြင္ ့လႊတ္ေပးလိုက္ပါ
ေနာက္တစ္မ်ိဳးသည္ ေကာင္းေလးနဲ ့ေကာင္မေလးတစ္ေယာက္သည္ အြန္လိုင္းေပၚမွာေတြ ့ႀကျခင္းပင္၊ေနာက္ဖုန္းအဆက္အသြယ္လုပ္ႀကရင္း ဖုန္းထဲမွာပင္ ခ်စ္သူျဖစ္ႀကသည္ ။သည္လိုုနဲ ့ပဲ အြန္လိုင္းမွာေတြ ့လိုက္ ..ဖုန္းထဲမွာ ေျပာႀကနဲ ့ ..ေကာင္ေလးက တခါမွမျမင္ဘူး..မေတြ ့ဘူးေသာ သူခ်စ္သူ ၇ွိရာနယ္သို ့လိုက္သြားပါသည္။ နယ္သို ့ေရာက္ေသာအခါေကာင္ေလးနဲ ့ေကာင္မေလးဘာေျပာေကာင္မလဲ ခ်စ္ၿကတာေပါ ့ ...စားအတူတူသြားအတူတူေပါ ့ ...အဲ ့လိုနဲ ့ပဲ ေကာင္ေလးနဲ ့ေကာင္မေလးက လက္ထပ္ဖို ့အထိဆံုးျဖတ္လိုက္တယ္ ...ေကာင္ေလးကအလည္လာတဲ ့အတြက္ ျပန္ရမွာေပါ ့ ....ျပန္မဲ ့ညက်မွေကာင္ေလးက အြန္လိုင္းတက္ျပီး သူ ့ေမလ္းစစ္တယ္..ဘာရယ္..ညာရယ္ေတာ ့မဟုတ္ဘူး..ေကာင္မေလးအေကာင္ ့ကိုေလွ်ာက္ဖြင္ ့လိုက္တာပြင္ ့သြားတယ္.အဲ ့မွာေကာင္မေလးက်ဴထားတာေတြေတြ ့သြားတာေပါ ့..ဘာေျပာေကာင္မလဲ ....ေကာင္ေလး စိတ္တိုျပီး..နွုတ္မဆက္ပဲ ျပန္သြားတာေပါ ့ ....ေကာင္မေလးကလဲ အဲ ့တာေတြသိေတာ ့ ငိုတာေပါ ့ ....ေကာင္မေလးက ငိုျပီးဖုန္းေတြဆက္ ....အဲ ့မွာေကာင္ေလးက ကတိတစ္ခုေတာင္းလိုက္တယ္..ေနာက္မလုပ္မဲ ့အေႀကာင္းကိုေပါ ့ ..ေကာင္မေလးကလဲကတိေပးပါတယ္ ...အဲ ့လိုနဲ ့သူတို ့ႏွစ္ိေယာက္အခ်စ္ခရီးဆက္ႀကတာ အခုထိပါပဲ ....ကဲ စာဖတ္သူသူငယ္ခ်င္းတို ့ေရ ..မင္းတို ့လဲ မင္းတို ့ခ်စ္သူေတြကိုတကယ္ခ်စ္ႀကရင္ မင္းတို ့ရဲ ့လူပ်ိဳဘ၀ေတြကိုလက္မထပ္ခင္ထိန္းသိမ္းႀကပါ ...လက္ထပ္မယ္ဆိုလွ်င္လည္း မိမိခ်စ္သူနွင္ ့အတူ ပြင္ ့လင္းစြာေဆြးေၽႏြးက်ပါ ....မမွားေသာေ၇ွ ့ေနနဲ ့..မေသေသာေဆးသမားဆိုတဲ ့စကားပံုတိုင္းပါပဲ ...ေလာကမွာလူဆိုတာ အမွားနဲ ့မကင္းပါဘူး ..အဲ ့ေတာ ့ သူကိုယ္တကယ္ခ်စ္ရင္ သူ ့အမွားေလးတစ္ခုကိုခြင္ ့လႊတ္ေပးလိုက္ပါ .....ခြင္ ့လႊတ္ျခင္းဟာ ခ်မ္းသာျခင္းတစ္မ်ိဳးပါပဲ .....ေနာက္တစ္ႀကိမ္ထပ္လုပ္ခဲ ့ရင္ေတာ ့ သူငယ္ခ်င္းေရ ေထာင္ ့ငါးရာကို သံုးေထာင္ေပး၇င္ေတာင္ လွည္ ့မႀကည္ ့နဲ ့ေတာ ့ ....ဘာပဲ ေျပာေျပာ ...တႀကိမ္တခါမွားမိတာကို ခြင္ ့လႊတ္တ္ျခင္းဆိုတဲ ့ ေမတၱာတရားနဲ ့ဘ၀မွာသူ ့ကိုလက္တြဲဆက္ခ်စ္ႏိုင္ႀကျပီး ရိုးေျမက်ေပါင္းသင္းႏိုင္ႀကပါေစ ......
Recent
Comment
Label
- ရင္းတြင္းစာ
- ဟာသေလးမ်ား